Panasonic KX-PS8100 Benutzerhandbuch

If you wish to adjust the density for all colors 
simultaneously, perform the following, then go to 

1) Repeat steps 1 through 3 in 

“Calibration Offset” is displayed in the printer LCD panel.

2) Press the ENTER button.

“0*” (–5 to 5) is displayed in the printer LCD panel.

3) Press the 

▲

/CONTINUE or 

⁄

/CANCEL button to 

darken/lighten all the colors.

To make the color density setting of the Color Calibration Page 
darker or lighter by 1 level, increase or decrease a value of the 
Calibration Offset by 3 by pressing the 

▲

/CONTINUE or 

⁄

/CANCEL button.

For example when Calibration Offset is 0:

•

If you wish to make the density setting darker by 1 level:

—Select 3 by pressing the 

▲

/CONTINUE button 3 times.

•

If you wish to make the density setting lighter by 1 level:

—Select –3 by pressing the 

⁄

/CANCEL button 3 times.

4) Press the ENTER button.

“CYAN” is displayed in the printer LCD panel.

5) Press the 

▲

/CONTINUE button 4 times.

“Calibration Test Print” is displayed in the printer LCD panel.

If you wish to adjust the density for each color 
independently, perform the following, then go to 

1) Repeat steps 1 through 3 in “To print a color 

calibration page”.

2) Press the 

▲

/CONTINUE button.

“CYAN” is displayed in the printer LCD panel.

3) Press the ENTER button.

“0*” (–10 to 10) is displayed in the printer LCD panel.