Panasonic ICX Benutzerhandbuch

Chapter 5.Tuning the Commands to Your Voice

Section 770-Voice Recognition Telephone

ICX-25-770

ICX issued August 1998

27

other choices." Press the "Go Back" Soft Key [EXEC] to go 
back to step 6 and repeat the process.

9.  Again say the control command to be retrained.

Voice Guidance responds with "Say it again".

Example: Say "Complete"  

→

 Voice Guidance responds with "Say 

it again".

10.  Again say the control command to be retrained.

Voice Guidance responds with '"

" stored' and the Splash 

tone sounds.

After storing your own voice in the system, execution returns to 
step 6.

Example: Say "Complete"  

→

 Voice Guidance responds with 

'"Complete" stored'.

To continue retraining other commands, repeat steps 7 to 10.

•

If the spoken command is too long
The following message is displayed and Voice Guidance 
responds with "Try again". Repeat the procedure from step 8 
making the command shorter. (The maximum recording time 
per entry is 2.5 seconds.)

•

If the tone used in step 10 differs from that used in step 9
The following message is displayed and Voice Guidance 
responds with "Try again". Repeat the procedure from step 8.

•

If the recorded name is identical to an existing entry
The following message is displayed and Voice Guidance 
responds with "'

' Conflict. Try again." Enter "Yes" to return 

to step 8. Create the entry using a different name.

11. Replace the handset.

Notes: • To abort the retraining procedure at any point before step 10, simply 

replace the handset.

• You can press the Cancel Key at any point to display the TOP 

MENU, allowing you to store new entries or edit or delete existing 
entries. This function can be useful if you want to check the 
contents of the Phonebook or place a call during the retraining 
procedure.