Panasonic kx-tcd280fx Benutzerhandbuch

13

Press {ih} for about 1 second.

L

The display will change to the standby 
mode.

Press {ih} for about 2 seconds.

L

The display will go blank.

L

Confirm that the AC adaptor is connected. 

L

Ensure that w is not flashing.

Press {j/OK}.

Select “Handset Setup”, then press 
{>}

.

Select “Time Settings”, then press 
{>}

.

Select “Set Date & Time”, then press 
{>}

.

Enter the current day, month and year by 
selecting 2 digits for each.
Example: 17 May, 2006
Press {1}{7} {0}{5} {0}{6}.

Enter the current hour and minute by 
selecting 2 digits for each.
L

You can select “AM”, “PM” or 24-hour 
time entry by pressing {*} repeatedly.

Example: 3:30 PM
Press {0}{3} {3}{0}, then press {*} 
repeatedly until “03:30 PM” is 
displayed.

Press {j/OK}.

Press {ih}.

Note:
To correct a digit, press {<} or {>} to move 
the cursor, then make the correction.
The date and time may be incorrect after a 
power failure.  In this case, set the date and 
time again.

Base unit number: The left 
icon shows base unit 2 
example (page 27).

F

New SMS message 
received (SMS users only; 
page 38)

[IN USE]

Line is being used by 
another handset.