Panasonic KX-TCD735ALM Benutzerhandbuch

Seite von 114
63
Chapter 3
Programmable Functions on the Handset
To set the direct call number
1
Press .
2
Press 
or 
until the arrow points to
Setting Handset
”, then press 
.
3
Press 
or 
until the arrow points to
Call Option
”, then press 
.
4
Press 
or 
until the arrow points to
Direct Call No.
”, then press 
.
E n t e r P h o n e No
” is displayed.
5
Enter the phone number up to 24 digits.
If you misdial, press 
. The digits are
erased from the right. To erase all digits,
press and hold 
.
6
Press .
7
While “
Save
” is at the arrow, press 
.
8
Press 
or 
to select “
ON
” or
OFF
”, then press
.
A beep sounds.
The display will return to 
Direct Call
No.
”. To return to the standby mode, press
or wait for 60 seconds. “ 
” will be
shown at the top right corner on the
standby mode display when set to ON.
C
C
with the Handset
Direct Call
You can easily make a call using a stored direct call number by pressing 
or 
. Incoming
calls are accepted. The factory preset is OFF.
After storing the direct call number, the unit will automatically switch to the direct call mode. When the
direct call mode is on, you can ONLY dial the number stored in the direct call memory.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
To set the direct call mode
ON/OFF
1
Follow steps 1 to 3 on To set the direct
call number.
2
Press
or 
until the arrow points
to “
Direct ON/OFF
”, then press 
.
3
Press or to 
select 
ON
” or
OFF
”, then press 
.
A beep sounds.
The display will return to “
Direct
ON/OFF
”. To return to the standby mode,
press 
or wait for 60 seconds. “
will be shown at the top right corner on the
standby mode display when set to ON.
When set to off , “
” will go out.
To dial the stored number
Make sure that “
” is displayed, then press
or .
The number stored in the direct call memory is
automatically dialled.
KX-TCD735ALM(E)-3(50~75)  2002.06.21 5:24 PM  Page 63