Panasonic kx-tcd715 Benutzerhandbuch
59
Multi-Unit User Operations
Chapter 4
1
Base unit where handset is to be
registered:
Press and hold
registered:
Press and hold
on the base unit
for more than 10 seconds until the in use
indicator (
indicator (
) lights and a
confirmation tone sounds.
2
Handset:
Press .
Press .
3
Press
or
until the arrow points
to “
Setting Handset
”, then press
.
4
Press
or
until the arrow points
to “
Registration
”, then press
.
5
Press
or
until the arrow points
to “
Register H/set
”, then press
.
•
The available base unit numbers are
displayed.
displayed.
6
Press
or
to select the desired
base unit number 1 to 4, then press
.
•
The number is assigned as the base unit
number for the handset.
number for the handset.
•
The in use indicator (
) on the base
unit will go out.
•
To register the handset in more than one base
unit, repeat from step 1 with the other base
unit(s).
unit, repeat from step 1 with the other base
unit(s).
•
The base unit number which the handset is
currently in contact with can be displayed in
the standby mode (p. 64). Calls (both incoming
and outgoing) can be conducted only via the
displayed base unit (even if the radio areas
overlap with neighbouring base units).
currently in contact with can be displayed in
the standby mode (p. 64). Calls (both incoming
and outgoing) can be conducted only via the
displayed base unit (even if the radio areas
overlap with neighbouring base units).
7
Enter the 4-digit base unit PIN (p. 55).
8
Press .
•
“
Please Wait...
” is displayed, then
a beep sounds.
•
The handset will return to the standby
mode. The current connected base unit
number will be displayed.
mode. The current connected base unit
number will be displayed.
P l e a s e W a i t . . .
E n t e r B a s e P I N
: – – – –
: – – – –
B a s e 1
0 N e w C a l l s
Ex. The handset is registered to the base
unit 1.
We recommend you to change the
handset/base unit PIN to prevent unauthorised
use of your unit by another person (p. 55).
handset/base unit PIN to prevent unauthorised
use of your unit by another person (p. 55).
Registering Handset(s) in the Base Unit
You must register the handset in the base unit before use.
•
Charge the optional handset batteries for about 15 hours before initial use.
•
Make sure that the power is ON (p. 13) and the unit is in the standby mode.
•
Register the handset number within 1 minute. If not registered within 1 minute, press
on the
handset to cancel the programming mode. Then start again from step 1.
KX-TCD715EM-8Multi 01.7.19 2:15 PM Page 59