Panasonic kx-tcd150fx Benutzerhandbuch

15

 Useful Information

If you still have difficulties after following the instructions in this section, disconnect the AC 
adaptor and turn off the handset, then reconnect the AC adaptor and turn on the handset.

w

 is flashing.

L

The handset is too far from the base unit. Move 
closer.

L

The AC adaptor is not connected. Check the 
connections.

L

You are using the handset or base unit in an area 
with high electrical interference. Locate the 
handset and base unit away from interference 
sources, such as antenna and mobile phones.

L

The handset registration is cancelled. Register the 
handset to the base unit using the following 
method.

{j

/OK}

“SETTING HS” i {>}

“REGISTRATION” i {>}

“REGISTER HS” i {>}

Press and hold {x} on the base unit until the 
registration tone sounds.

L

The rest of the procedure must be completed 
within 1 minute.

Select a base unit number ({v}). i {>}

Wait until “BS PIN” is displayed. i Enter 
base unit PIN (default: “0000”). i {>}
L

A confirmation tone will sound, and w will 
stop flashing.

I cannot make or receive calls.

L

The AC adaptor or telephone line cord is not 
connected. Check the connections.

L

The call bar feature is turned on. Turn it off (page 
10).

L

You dialled a call restricted number (page 13).

L

The key lock feature is turned on. Turn it off (page 
8).

L

The dialling mode setting is incorrect. Set to 
“Tone” or “Pulse” as needed (page 7).

The unit does not ring.

L

The ringer volume is turned off. Adjust the ringer 
volume (page 10, 12).

TCD150FX(e-e).book  Page 15  Thursday, June 9, 2005  6:59 PM