Panasonic kx-tcd735 Benutzerhandbuch
67
Chapter 4
Programmable Functions on the Base Unit
Base Unit PIN
with the Handset
Setting the 4-digit Base Unit PIN
You can program a 4-digit base unit PIN (Personal Identification Number). The factory preset is 0000.
Changing the PIN may prevent the unauthorised use of your unit by another person.
Changing the PIN may prevent the unauthorised use of your unit by another person.
—Cancelling a Handset Registration in the
Base Unit (p. 97)
—Reset the Base Unit Settings (p. 75)
4
Enter the new 4-digit base unit PIN
TWICE.
TWICE.
•
A beep sounds.
•
The display will return to “
Setting
Base
”. To return to the standby mode,
press .
—Ringer Mode Selection (p. 68, 69)
—Selecting Time Break Recall/Earth (Option)
—Selecting Time Break Recall/Earth (Option)
Mode (p. 71)
—Selecting the Pause Timing (p. 72)
—Call Restriction (p. 73)
—Call Restriction (p. 73)
1
Press .
2
Press
or
until the arrow points
to “
Setting Base
”, then press
.
•
“
Input Command
” is displayed.
3
Press
, then enter the current 4-digit
base unit PIN.
•
The factory preset is 0000.
5
•
If 5 beeps sound in step 3, the entered 4-digit
base unit PIN is incorrect. Enter the correct
4-digit base unit PIN.
base unit PIN is incorrect. Enter the correct
4-digit base unit PIN.
•
You can exit the programming mode any time
by pressing
by pressing
.
I n p u t C o m m a n d
5 ----
I n p u t C o m m a n d
5 ---- ----
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
Once you have programmed the 4-digit base unit PIN, you cannot confirm it. We recommend you
to write down the 4-digit base unit PIN. If you forget it, please consult your nearest Panasonic
Customer Care Centre.
to write down the 4-digit base unit PIN. If you forget it, please consult your nearest Panasonic
Customer Care Centre.
You need to enter the 4-digit base unit PIN when using the following functions.
4-digit base unit PIN
KX-TCD735EM(E)-3(50~75) 01.10.22 16:15 Page 67