Panasonic kx-tg7160e Benutzerhandbuch
Preparation
12
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Battery charge
Place the handset on the base unit for
about 7 hours before initial use.
When charging, the battery icon is shown as
follows.
about 7 hours before initial use.
When charging, the battery icon is shown as
follows.
When the batteries are fully charged, 5
remains on the display.
remains on the display.
L
The charge indicator lights up when the
handset is placed on the base unit.
handset is placed on the base unit.
L
The pictured model is KX-TG7160.
Note:
L
It is normal for the handset to feel warm
during charging.
during charging.
L
If you want to use the unit immediately,
charge the batteries for at least 15
minutes.
charge the batteries for at least 15
minutes.
L
Clean the charge contacts of the handset
and base unit with a soft, dry cloth once a
month, otherwise the batteries may not
charge properly. Clean more often if the
unit is exposed to grease, dust, or high
humidity.
and base unit with a soft, dry cloth once a
month, otherwise the batteries may not
charge properly. Clean more often if the
unit is exposed to grease, dust, or high
humidity.
Battery strength
Panasonic Ni-MH battery performance
(included batteries)
(included batteries)
Note:
L
It is normal for batteries not to reach full
capacity at the initial charge. Maximum
battery performance is reached after a few
complete cycles of charge/discharge
(use).
capacity at the initial charge. Maximum
battery performance is reached after a few
complete cycles of charge/discharge
(use).
L
Actual battery performance depends on a
combination of how often the handset is in
use and how often it is not in use
(standby).
combination of how often the handset is in
use and how often it is not in use
(standby).
L
Battery operating time may be shortened
over time depending on usage conditions
and ambient temperature.
over time depending on usage conditions
and ambient temperature.
L
Even after the handset is fully charged,
the handset can be left on the base unit
without any ill effect on the batteries.
the handset can be left on the base unit
without any ill effect on the batteries.
L
The battery strength may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the base
unit and charge for at least 7 hours.
correctly after you replace the batteries. In
this case, place the handset on the base
unit and charge for at least 7 hours.
Charge
contact
contact
Battery icon
Battery strength
5
High
6
Medium
7
Low
When flashing: Needs
to be charged.
When flashing: Needs
to be charged.
Operation
Operating time
In continuous use
KX-TG7160:
12 hours max.
KX-TG7180:
10 hours max.
12 hours max.
KX-TG7180:
10 hours max.
In continuous
standby mode
standby mode
150 hours max.
TG7160-7180E(e).book Page 12 Thursday, July 27, 2006 12:45 PM