Panasonic kx-tg7102fx Benutzerhandbuch

Seite von 48
Preparation
8
 
Connections
Base unit
When connecting the AC adaptor to the 
base unit, a short beep will be heard. If it is 
not heard, check the connections.
Charger (KX-TG7102 only)
Connect the AC adaptor to the charger and 
route the cable as shown. The charger can 
be mounted on the wall, if required.
Note:
L
Never install telephone wiring during a 
lightning storm.
L
The AC adaptor must remain connected 
at all times. (It is normal for the adaptor to 
feel warm during use.)
L
The AC adaptor should be connected to a 
vertically oriented or floor-mounted AC 
outlet. Do not connect the AC adaptor to a 
ceiling-mounted AC outlet, as the weight 
of the adaptor may cause it to become 
disconnected.
Location
L
For maximum distance and noise-free 
operation, place your base unit:
– away from electrical appliances such as 
TVs, radios, personal computers or 
other phones.
– in a convenient, high and central 
location.
Battery 
installation/replacement
Important:
L
Use only the included rechargeable 
batteries noted on page 4, 5.
L
When replacing batteries, we recommend 
using the Panasonic rechargeable 
batteries noted on page 4, 5.
1
Press the notch on the handset cover 
firmly and slide it in the direction of the 
arrow.
Use only the included AC 
adaptor and telephone line 
cord.
(220–240 V, 50 Hz)
To telephone 
network
Hook
(220–240 V, 
50 Hz)
Screws
25 mm
Hooks
Use only the included AC adaptor.
TG7100-7120FX(e-e).book  Page 8  Thursday, August 10, 2006  10:32 AM