Panasonic kx-tg8120fx Benutzerhandbuch
Preparation
10
*The pictured model is KX-TG8100.
Note:
Note:
L
It is normal for the handset to feel warm
during charging.
during charging.
L
If you want to use the unit immediately,
charge the batteries for at least 15
minutes.
charge the batteries for at least 15
minutes.
L
Clean the charge contacts of the handset
and base unit with a soft, dry cloth once a
month, otherwise the batteries may not
charge properly. Clean more often if the
unit is exposed to grease, dust or high
humidity.
and base unit with a soft, dry cloth once a
month, otherwise the batteries may not
charge properly. Clean more often if the
unit is exposed to grease, dust or high
humidity.
Battery strength
Panasonic Ni-MH battery performance
(included batteries)
(included batteries)
Note:
L
It is normal for batteries not to reach full
capacity at the initial charge. Maximum
capacity at the initial charge. Maximum
battery performance is reached after a few
complete cycles of charge/discharge
(use).
complete cycles of charge/discharge
(use).
L
Actual battery performance depends on a
combination of how often the handset is in
use and how often it is not in use
(standby).
combination of how often the handset is in
use and how often it is not in use
(standby).
L
Battery operating time may be shortened
over time depending on usage conditions
and ambient temperature.
over time depending on usage conditions
and ambient temperature.
L
Even after the handset is fully charged,
the handset can be left on the base unit
without any ill effect on the batteries.
the handset can be left on the base unit
without any ill effect on the batteries.
L
The battery strength may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the base
unit and charge for at least 7 hours.
correctly after you replace the batteries. In
this case, place the handset on the base
unit and charge for at least 7 hours.
Screen saver mode
The backlight will turn off completely
after 1 minute of inactivity if the handset is
not on the base unit.
To use the handset when it is in screen
saver mode, first press {ih} to turn the
display on again.
after 1 minute of inactivity if the handset is
not on the base unit.
To use the handset when it is in screen
saver mode, first press {ih} to turn the
display on again.
Turning the power on/off
Power on
Press {ih} for about 1 second.
Power off
Press {ih} for about 2 seconds.
Battery icon
Battery strength
1
High
2
Medium
3
Low
When flashing: Needs
to be charged.
When flashing: Needs
to be charged.
Operation
Operating time
In continuous use
12 hours max.
In continuous
standby mode
standby mode
150 hours max.
Charge
contact
contact
TG8100-8120FX(e).book Page 10 Wednesday, August 9, 2006 3:13 PM