Panasonic kx-ts620exb Benutzerhandbuch

13

Press {OK} (Save key).

• A long beep sounds.
• The clock starts working.
• The display will return to step 2. To 

exit the programming mode, press 

 or wait for 60 seconds.

• You can go back to the previous screen by 

pressing {

3

}

, when setting the time and 

date (steps 3 through 9).

• If 3 beeps sound when entering the time 

and date, the time and date entered are 
not correct. Enter the correct time and 
date.

• If the selected LCD language is Dutch, the 

day and month will display as “day/month”.

You can select either “English”, 
“French”, “Spanish”, “Italian”, “Greek” 
or “ Dutch” as the display language. 
Your phone default setting is “English”.

Make sure that the handset is on the 
cradle, the AC adaptor is connected 
and the Speakerphone/headset {s/W} 
indicator light is off.

Press .
 

Scroll to “Change language?” 
by pressing {

4

}

 or {

3

}

.

Press {OK} (Yes key).

Select “English”, “Français”, 
“Español”, “Italiano”, 
“E

ΛΛ

” or “Nederlands” 

by pressing {

4

}

 or {

3

}

.

Press {OK} (Save key).

• A long beep sounds.
• The display will return to step 2.

To exit the programming mode,
press 

or wait for 60 seconds.

• You can exit the programming mode any 

time by pressing 

.

• If Dutch is selected, the day and month 

display will show as “day/month”.

After recover from power failure, “

” will 

flash. Readjust the time and date

.

If a time display service is available with 
the Caller ID service:
• The Caller ID information will re-set the 

clock after the ring if the adjusted time 
and/or date is incorrect and the Time 
Adjustment set to ON 

(p. 15)

. If the time/

date has not previously been set, the 
Caller ID information will not adjust the 
clock.

{ ? }

{

?

}

{ ? }

{ ? }

TS620EX.book  Page 13  Monday, July 17, 2006  5:18 PM