Panasonic kx-ts620exb Benutzerhandbuch
44
Automatic Answering Operation
When the unit answers a call, a greeting message is played and the caller’s
message is recorded. When recording, “– Answering –” will flash on the display.
message is recorded. When recording, “– Answering –” will flash on the display.
Setting the Unit to Answer Calls
Press {s} to turn on the answering system.
• The MESSAGE indicator lights and the unit announces “Answer set” and the current day
and time.
• The unit will announce the remaining recording time if it is less than 3 minutes.
• If you hear “Memory full” and “Message full” is displayed, erase some, or all, of the
• If you hear “Memory full” and “Message full” is displayed, erase some, or all, of the
messages (p. 47).
• If you do not want the unit to answer calls, press {s} again to turn off the answering
system. The indicator light goes out and “Answer off” is heard.
• You can also turn on the answering system remotely using any other phone (p. 53).
Monitoring incoming calls
While a call is being recorded, you can monitor it through the speaker.
• To increase the speaker volume, press X/Y {
3
}
. To decrease, press X/Y {
4
}
.
To answer the call, lift the handset or press {s/W}. The unit stops recording.
• The recording time is about 15 minutes.
If messages are recorded in noisy rooms, the time may be shortened by up to 3 minutes.
• A maximum of 64 messages can be recorded.
MESSAGE Indicator
{s
/W}
Answering System
{
s}
TS620EX.book Page 44 Monday, July 17, 2006 5:18 PM