Panasonic tx-15ta1c Benutzerhandbuch

Seite von 52
2
WELCOME
Dear Panasonic Customer
welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your
new colour television set. Technically your set is more advanced than the previous models, however the “Quick
Start-Up Guide” will help you operate your set easily. Later you may read this manual and use it for further
reference.
WARNINGS AND PRECAUTIONS
• This Multi Media Terminal set is designed to be connected to an AC 100-240V, 50/60Hz power source.
• To avoid damage that may result in an electric shock or fire do not expose the unit to rain or excessive
moisture.
• WARNING: HIGH VOLTAGE!!!
  Do not remove the rear cover as live parts and high-voltage  components are accessible. No components
need any technical maintenance by the user.
• The power switch does not totally disconnect the set from the power source. If you are not going to use the
unit for an extended period, unplug the power plug from the socket.
• CLEANING THE UNIT AND SCREEN
Unplug the power plug from the socket. To clean the unit and the screen use a soft cloth slightly soaked in a
soap solution. Do not use solutions containing benzene or other petroleum products. The unit may generate
stoic electricity, so be careful when touching the screen.
• Do not expose he unit to direct sunlight or other sources of direct heat.
• Adequate ventilation is essential to prevent failure of electrical components; we recommend that a gap of at
least 5 cm is left around the unit even when it is placed inside a cabinet or between shelves.
• WASTE DISPOSAL
The used packaging and batteries should be disposed of in special containers intended for this purpose.
CE CONFORMITY
This device complies with the requirements of EEC directive 89 / 336 / EEC as amended by  92
/ 31 EEC and 93 / 68 / EEC Art, 5 with regard to ‘‘Electromagnetic compatibility”, and of 73 / 23 /
EEC as amended by 93 / 68 / EEC Art. 13 with regard to ‘‘safety’’
#1 :Satisfies standards with no problems in performance and reliability.
#2 :Effects may appear temporarily on the screen but there will be no problem in reliability.
#3 :There is  fear of the product breaking down.
#4 :If a signal cable other than that specified is used, it may be the cause of electromagnetic interference to
peripheral devices.
To assure continued CE compliance, the user must use the provided 1.5 m shielded video signal cable with
bonded ferrite cores at both ends of the cable.
Handle correctly in accordance with the instruction manual.
EMI: Electromagnetic Interference
ESD: Electrostatic Discharge
RF : Radio Frequency
F/B : Fast Transient / Burst
Required item
EMI
ESD
RADIATED RF
TRANSIENT F/B
LINE HARMONICS
Remarks
Relative to Standard Value Relative to those Exceeding Standard Value
NOTE:
  For aesthetic reasons, it is recommended not to use the primary color blue on a dark background, this would
result in poor discernibility, eye strain and insufficient character contrast.