Panasonic NV-GS25GN Benutzerhandbuch

Others

LSQT0893

If any one of the following indications lights up or 
flashes, please check the movie camera.
Confirmatory indications
Y: A cassette with the accidental erasure 

prevention slider placed in the [SAVE] 
position is inserted.
No cassette is inserted.

[--]/

0:

The built-in battery is low. 

°: The warning/alarm indication appears when 

you record yourself. Turn the LCD monitor 
towards the viewfinder and check the 
warning/alarm indication.

: No card is inserted.

REMOTE : 

An incorrect remote control mode has been 
selected. 

2END: 

The tape came to the end during recording.

::  The video heads are dirty. 

Textual indications
3DEW DETECT/3EJECT TAPE:

Condensation has occurred. Take out the 
cassette and wait for a while. It takes some 
time until the cassette holder opens, but this 
is not a malfunction. 

LOW BATTERY: 

The battery is low. Recharge it. 

NO TAPE : 

No tape is inserted. 

TAPE END: 

The tape came to the end during recording.

CHECK REC TAB: 

You are attempting to record pictures on a 
tape with the accidental erasure prevention 
slider placed in the [SAVE] position. 
You are attempting audio dubbing or digital 
dubbing on a tape with the accidental 
erasure prevention slider placed in the 
[SAVE] position. 

CHECK REMOTE MODE:

An incorrect remote control mode has been 
selected. This is only displayed at the first 
operation of the remote control after 
powering-on. 

WRONG TAPE FORMAT: 

You are attempting to play back a tape 
section that has been recorded with a 
different TV system. This cassette is 
incompatible.

UNPLAYABLE CARD: 

You are attempting to play back data not 
compatible with this movie camera.

UNABLE TO A.DUB (LP RECORDED): 

Audio dubbing cannot be performed 
because the original recording was in LP 
mode.

UNABLE TO A.DUB:

You are attempting to perform audio 
dubbing on a non-recorded tape.

COPY PROTECTED: 

Images cannot be recorded correctly 
because the medium is protected by a copy 
guard.

CARD ERROR: 

This card is not compatible with this movie 
camera.
You are attempting to format a failed card.
It displays, when you attempt to insert the 
incompatible card to Card Slot.

NO CARD: 

No card is inserted.

CARD FULL: 

Card does not have sufficient memory 
remaining. 
Select Picture Playback Mode and delete 
unnecessary files.

NO DATA: 

There are not any recorded files on the 
card.

FILE LOCKED: 

You are attempting to erase protected files.

CARD LOCKED: 

The write protection switch on the SD 
Memory Card is set to [LOCK].

NEED HEAD CLEANING: 

The video heads are dirty. 

PUSH THE RESET SWITCH: 

An irregularity in the equipment has been 
detected. Press the [RESET] button (

). 

This may solve the problem.

CHANGE MODE TO USE USB: 

The USB cable is connected to the movie 
camera in Card Recording Mode.

DISCONNECT USB CABLE: 

You are attempting to turn the mode dial in 
PC mode with the USB cable connected to 
the movie camera. You are attempting to 
record pictures on a tape/card with the USB 
cable connected to the movie camera.

PC DOES NOT SUPPORT USB2.0: 

The movie camera is connected to a 
personal computer that does not support 
USB 2.0.

CAN NOT USE USB: 

You are connecting the USB cable with the 
DV cable connected.

GS35_25GN.book  43 ページ  ２００５年１月３１日　月曜日　午後３時２５分