Panasonic nv-ex21b Benutzerhandbuch

Seite von 60
34
Using a Card
A Card can be used to record files or play back files.
≥Use genuine card only.
ª Inserting a Card
Before inserting a Card, be sure to turn off the Movie Camera.
1
While holding the Memory Card with its cut off corner 
A
 
facing right 
1
, insert it into the Card Slot 
2
.
≥The display of the Card Slot changes from 
3
 to 
4
.
Ejecting a Card
After turning the Movie Camera off, slide the [CARD EJECT] Lever 
5
 to the 
left.
ª [ACCESS] Lamp
 
6
While the Movie Camera is making an access to the Card (reading, 
recording, playback, erasing or moving of images), the [ACCESS] Lamp 
lights up.
≥While the [ACCESS] Lamp is on, never attempt to open the Card 
Compartment, to pull out the Card, to turn off the Movie Camera, or to 
switch the [TAPE/CARD] Selector. Such actions will damage the Card, 
cause loss of recorded data and cause the Movie Camera to malfunction.
~~~~~~~~~~~~~~~~~~~~~~~~
Recording on a Card
Three kinds of data can be recorded by selecting with the [PICTURE/
MPEG4/VOICE] Selector Switch. When recording picture, select [PICTURE] 
(Card PhotoShot), when recording moving picture, select [MPEG4] (MPEG4 
Recording), when recording voice, select [VOICE] (Voice Recording).
≥If the [TAPE/CARD] Selector is set to [CARD], the Movie Camera is 
automatically turned off when you leave it for about 6 minutes without 
performing any photshot recording.
≥When the [TAPE/CARD] Selector is set to [CARD], you cannot record to the 
Tape.
ª Card Photoshot 
Still pictures can be recorded on the Memory Card from the Movie Camera 
lens as well as from scenes that have already been recorded on a cassette.
The size of images that are recorded using this Movie Camera is 
approximately 1,080,000 pixels, and recording of images with a size that is 
larger than a million pixels is called mega-pixel still-picture recording. 
Compared to images of normal recording, images that are created by mega-
pixel still-picture recording can be printed out clearer.
Recording from the Movie Camera Lens (CAMERA Mode)
1
Slide the [TAPE/CARD] Selector towards [CARD].
2
Slide the [PICTURE/MPEG4/VOICE] Selector Switch to 
[PICTURE].
3
Set [PICTURE SIZE] in [CARD SETUP] Sub-Menu to 
[1200
t900] or [640t480].
≥If you select [1200t900], you can take pictures with higher resolution. 
(Mega-Pixel Recording)
4
Press the [PHOTO SHOT] Button.
≥The [
] Indication light in red. 
1
Recording is not possible while the [ACCESS] Indication is lit.
≥Please use the supplied Lens Hood for MEGA Still Picture Recording in 
Mega-Pixel Recording. You can get better image.
Recording from a Cassette (VCR Mode)
1
1
1
1
Slide the [TAPE/CARD] Selector towards [CARD].
2
2
2
2
Slide the [PICTURE/MPEG4/VOICE] Selector Switch to 
[PICTURE].
3
3
3
3
Start playback at the scene you want to record, and press 
the [PHOTO SHOT] Button.
≥The size of the images input externally or recorded from a tape to the 
card becomes [640
k480].
≥Please refer to “Recording the Contents of Other Equipment” (
l 49)
regarding the recording from other equipment.
≥For other notes concerning this item, see page 49. 
F 7
640
1, 
1
TAPE
CARD
1
4, 
3
PHOTO
SHOT
3
3
W.B./SHUTTER/IRIS/
MF/VOL/JOG
PUSH
1
2
ACCESS
CAMERA
CARD P. B
VCR
PICTURE
RESET
MPEG4 VOICE
CARD
MODE
2, 
2
OFF ON
MODE
3
1
3
4
2
A
ACCESS
CARD EJECT
6
5
1