Panasonic nv-gs1 Benutzerhandbuch

≥With this mode, recorded images may turn out to be 

extremely dark.

≥If the recording subject is extremely bright, its recorded 

image may turn out to be whitish.

≥If the recording subject is extremely bright, its recorded 

image may turn out to be whitish.

ª White Balance

In the following cases, you cannot change White 
Balance:
≥When you set [EFFECT1] of [DIGITAL EFFECT] 

Sub-Menu on the [CAMERA FUNCTIONS] Main-Menu to 
[GAINUP] or [EFFECT2] to [SEPIA] or to [B/W].

≥When you set the Zoom to 10k or higher
≥During Digital Still Picture Mode
≥When you display a Menu
≥When you use the Colour Night View
In the following cases, the [

1] Indication flashes:

≥The flashing indicates that the previously adjusted White 

Balance setting is still kept. This setting will be kept until 
White Balance is adjusted again.

≥You may not be able to achieve correct White Balance 

Adjustment manually under weak illumination.

ª Manual Shutter Speed Adjustment

≥You may see vertical lines of light in the playback image of 

a brightly shining subject or highly reflective subject.

≥During normal playback, movement in the images may not 

look smooth.

≥Because the colour and brightness of the playback image 

may become unstable, avoid recording under fluorescent 
light, mercury light or sodium light.

≥If you are using either Gain-up Mode (

l 24) or Programme 

AE Mode 

l 21), you cannot adjust the shutter speed. If 

the shutter speed was adjusted manually, this setting will 
be cancelled.

ª Manual Iris Adjustment

≥Depending on zoom magnification, there are iris values 

that will not be displayed.

≥If you are using Programme AE Mode (

l 21), you cannot 

adjust the iris. If the iris is adjusted manually, this setting 
will be cancelled.

≥If you attempt to adjust the Shutter Speed after setting the 

Iris, the value set for the Iris will be cancelled.

ª Digital Effect Functions

≥It is not possible to use [MULTI], [P-IN-P], [WIPE], [MIX] or 

[TRACER] of [EFFECT1] together with the digital modes of 
[EFFECT2] on the [DIGITAL EFFECT] Sub-Menu.

≥If you have set [EFFECT2] to [B/W] or [SEPIA], changing 

the selected White Balance Mode is not possible.

l 21)

≥When [PROGRESSIVE] on the [CAMERA SETUP] 

Sub-Menu is set to [ON], the digital modes of [EFFECT1] 
on the [DIGITAL EFFECT] Sub-Menu cannot be used. 
(

l 44)

In the following cases, using the Digital Effect Function 
is not possible.
≥Card Mode

≥Manual Focus Mode
≥The shutter speed and White Balance cannot be operated.
≥The Sports Mode [

5], the Portrait Mode [7] and Low 

Light Mode [

4] are cancelled.

If either one of the following operations is carried out, stored 
images will be erased, and Wipe and Mix Functions cannot 
be used.
≥Use the Camera Search Function
≥Press the [STILL] Button

≥If the Movie Camera is turned off, the smaller picture 

disappears. 

≥Titles cannot be inserted into the smaller picture.

≥If the [MULTI] Button is pressed while self-recording Mirror 

Mode 

l 17) is used, the still picture is displayed from the 

upper right corner of the screen, but, in reality, the picture 
is recorded from the upper left corner as usual.

≥Multi-Picture Mode cannot be used in digital still picture 

mode.

≥The quality of Multi images deteriorates slightly.
≥The top and bottom of the Multi pictures will be cut off 

slightly.

ª Playing Back

If you continue to press the [

1] Button for 5 seconds or 

longer, the Movie Camera switches to Repeat Playback 
Mode, and the [R

!] Indication appears. (To cancel Repeat 

Playback Mode, set the [OFF/ON/MODE] Switch to [OFF].)

If you want to use the headphones to listen to the playback 
sound, set [AV JACK] on the [AV IN/OUT SETUP] Sub-Menu 
to [OUT/PHONES] and connect the headphones to the 
[PHONES] Socket 

l 6) on the Movie Camera. In this case, 

no sound (including a warning sound and shutter sound) will 
be reproduced through the built-in speaker of the Movie 
Camera.

You can select the sound by using the [AUDIO OUT] setting 
on the [PLAYBACK FUNCTIONS] Sub-Menu.
STEREO:Stereo Sound (main sound and sub sound)
L:

Left channel sound (main sound)

R:

Right channel sound (sub sound)

≥If you dub a tape recorded at the [12bit] selected as the 

[AUDIO REC] on the [RECORDING SETUP] Sub-Menu,  
playback sound becomes stereo sound regardless of the 
[AUDIO OUT] setting if [12bit AUDIO] is set to [MIX].

ª Index Search Functions

≥Index Search may not be possible at the beginning of tape.
≥Because Photoshot Index Signals are not recorded on still 

pictures recorded in Continuous Photoshot Mode, the 
Photoshot Index Search Function cannot be used for these 
still pictures.

≥Scene Index Search may not function properly if the 

interval between 2 scene index signals is shorter than 
1 minute.

ª Playback Zoom Function

≥You cannot adjust the sound volume with the Remote 

Controller in Playback Zoom Mode.

≥If you turn off the Movie Camera power or if you switch 

from VCR Mode to Camera Mode, Playback Zoom Mode is 
automatically cancelled.

≥Even if Playback Zoom Functions are being used, images 

that are output from the DV Terminal 

l 6) or Digital Still 

Picture Terminal 

l 32) are not enlarged.

≥As you enlarge an image, the quality of image suffers.
≥During a Playback Zoom, the Variable Speed Search 

Function cannot be changed with the Remote Controller.

B.book  45 ページ  ２００２年１月２８日 月曜日 午後３時４８分