Panasonic nv-gs50 Benutzerhandbuch

Seite von 16
Others
-61-
ª Lock Setting
≥The Lock Setting carried out by this Movie 
Camera is only effective for this Movie Camera.
≥The SD Memory Card has a write protection 
switch on it. If the switch is moved to the [LOCK] 
side, you cannot write to or format the Card. If it 
is moved back, you can.
≥The MPEG4 data recorded by another Movie 
Camera may not be able to cancel the lock 
setting.
Cautions for Use
ª After Use
1
Take out the Cassette. (
-12-
)
2
Set the [OFF/ON/MODE] Switch to [OFF].
3
Take out the Card. (
-38-
)
4
Detach the power supply and retract the 
Viewfinder or the LCD Monitor. (
-9-
,
-12-
)
5
To protect the Lens, attach the supplied 
Lens Cap.
ª Cautions for Use
When you use your Movie Camera in a rainy 
or snowy day or on a beach, make sure that 
no water enters inside the Movie Camera.
≥Water may cause the Movie Camera or 
Cassette to malfunction. (Irreparable failure 
may occur.)
≥If sea water splashes onto the Movie Camera, 
wet a soft cloth with tap water, wring it well, and 
use it to wipe the camera body carefully. Then, 
wipe it again thoroughly with a soft dry cloth.
Keep the Movie Camera away from 
magnetized equipment (such as a microwave 
oven, TV, video game equipment, etc.).
≥If you use the Movie Camera on or near a TV, 
images or sounds may be disturbed due to 
electromagnetic wave radiation.
≥Do not use near a cell phone because doing so 
may cause noise to adversely affect the picture 
and sound.
≥By strong magnetic fields created by speakers 
or large motors, recording on the tape may be 
damaged, or images may be distorted.
≥Electromagnetic wave radiation generated by a 
microprocessor may adversely affect the Movie 
Camera, causing the disturbance of images and 
sounds.
≥If the Movie Camera is affected by magnetically 
charged equipment and does not function 
properly, turn off the Movie Camera power and 
detach the Battery or AC Adaptor and then 
connect the Battery or AC Adaptor again. 
Thereafter, turn on the Movie Camera power.
Do not use your Movie Camera near radio 
transmitters or high-voltage lines.
≥If you record pictures near radio transmitters or 
high-voltage lines, recorded images or sounds 
may be adversely affected.
Do not use this Movie Camera for surveillance 
purpose or other business use.
≥If you use the Movie Camera for a long period of 
time, the internal temperature increases and, 
consequently, this may cause malfunction.
≥This Movie Camera is not intended for business 
use.
When you use your Movie Camera on a beach 
or similar place, do not let sand or fine dust 
get into the Movie Camera.
≥Sand or dust may damage the Movie Camera or 
Cassette. (Care should be taken when inserting 
and removing the Cassette.)
Do not spray insecticides or volatile 
chemicals onto the Movie Camera.
≥If the Movie Camera is sprayed with such 
chemicals, the camera body may be deformed 
and the surface finish may peel off.
≥Do not keep rubber or plastic product in contact 
with the Movie Camera for a long period of time.
Do not use benzine, thinner or alcohol for 
cleaning the Movie Camera.
≥The camera body may be deformed and the 
surface finish may peel off.
≥Before cleaning, detach the Battery or pull out 
the AC Mains Lead from the AC mains socket.
≥Wipe the Movie Camera with a soft dry cloth. To 
remove stubborn stains, wipe with a cloth that is 
soaked in a detergent diluted with water and 
afterward finish wiping with a dry cloth.
≥For storing or transporting the Movie Camera, 
place it in a bag or case lined with soft pads so 
as to prevent the coating on the camera body 
from being worn.
After use, be sure to take the Cassette out and 
detach the Battery from the Movie Camera or 
pull out the AC Mains Lead from AC mains 
socket.
≥If the Cassette is left in the Movie Camera, the 
tape sags and deteriorates.
≥If the Battery is left on the Movie Camera for a 
long time, the voltage drops excessively, and 
the Battery will not function even after it is 
recharged.
50B-ENG.book  61 ページ  2003年1月17日 金曜日 午後5時29分