Panasonic nv-hs930eg Benutzerhandbuch

Seite von 36
11
To Stop Playback Automatically
(Playback Off Timer Function)
If you set the playback duration, the playback will stop 
automatically.
After the set playback time has elapsed, the VCR 
automatically stops playback and switches off.
During normal playback, press the [Play] 
(26) on the VCR 
for more than 2 seconds to put the VCR in the Playback Off 
Timer mode.
After that, press this button on the VCR repeatedly until the 
desired playback duration is displayed on the VCR display.
• Repeatedly pressing this button changes the indication in 
the following order.
Counter display (normal playback mode)
#30 (min.)#60 (min.)#120 (min.) 
#180 (min.)#240 (min.)
#Counter display (normal playback mode)
To stop midway
Press the [Stop] 
To Ensure High Playback Picture Quality 
(3D DNR Function)
To activate the 3-Dimensional Digital Noise Reduction 
(3D DNR) function, press the [3D DNR] 
(40), so that the 
3D DNR lamp is lit.
• We recommend that you leave this function activated for 
normal use of the VCR. However, when performing editing, 
press the [3D DNR] 
(40) to turn this function off so that the 
3D DNR lamp is not lit, to ensure editing with optimal 
picture quality.
To Ensure a Stable and Shake-Free 
Playback Picture Quality (TBC Function)
This function improves the horizontal shaking and the stable 
distortion in the vertical lines which tend to take place when 
tapes are played back.
The Time Base Corrector (TBC) 
function is activated if the indicator 
(on the TV screen) is [TBC ON]. Use 
the [TBC] 
(47) to check the status or 
to activate the function. If you press 
this button once, the TBC indicator 
(on the TV screen) will display 
current status ([TBC ON] or 
[TBC OFF]). And if you press the button once again, the 
status will change ([TBC ON]/[TBC OFF]).
• We recommend that you leave this function activated for 
normal use of the VCR.
• The TBC function does not work during playback of a video 
cassette recorded in the MESECAM system.
• When you cannot ensure high playback picture quality, 
press the [TBC] 
(47) to turn this function off so that the 
[TBC OFF] indication appears on the TV screen.
• When switching the TBC function, the picture and the 
sound may be distorted. However these are not 
malfunctions.
TBC ON
TV screen