Panasonic nv-hv66eg Benutzerhandbuch

Time limited recording or playback
During recording, playback or stop mode the device 
switches to stand-by after a preset period of time. 
Press the button repeatedly to increase this period from 
30 to 60, 120, 180 or 240 minutes. 
The set time appears in the VCR’s display.

!

Press OFF-TIMER

!

Turn on the VCR.

!

Be sure the TV set is turned on and tuned to the video 
playback channel.

!

Insert a video cassette.

!

Press PLAY    to start playback.

!

Press STOP    to end playback.

Repeat playback 
The VCR repeats playback from beginning to the end of 
the recording.

!

In stop or playback mode press PLAY    for longer 
than 5 seconds. 
The symbol [R] appears on the VCR´s display.

!

Press STOP    to end playback.

Starting automatic playback
When inserting a cassette with removed protection tab, 
playback will start automatically. 

Playback from power stand-by mode
When inserting a cassette and pressing PLAY   , 
the device will turn itself on and start playing back.

Normally the VCR automatically adjusts the playback 
picture to the highest possible quality. Sometimes it 
may be necessary though to adjust the picture 
manually.

Picture noise or unclear picture during playback. 
(Tracking)

!

While in regular playback 
or in slow motion press 

programme selection button 

 (-) or   (+) until the noise 

  

disappears. 
If noise appears in a still 
picture, first switch VCR 

to slow motion, then 

adjust tracking.

D

In some video cassettes tracking can not 
be adjusted. This is not indicative of a VCR 
malfunction. 

!

Simultaneously press 

 

 (-) and 

 (+).

 

!

In still playback mode hold 

 

 (-) or 

 (+) 

 

until the picture stands still.

D

On some TV sets special playback functions may 
cause the picture to shift up or down. This is not 
a VCR malfunction.