Panasonic nv-hv66eg Benutzerhandbuch
VCR
3
1
2
3
1
2
3
AC IN~
Antenna
RF IN
Antenna input
Antenna input
RF OUT
Antenna output
Antenna output
Antenna input
RF coaxial cable
TV
AC mains lead
AC mains lead
Connecting with RF Coaxial cable
Connect antenna to the
RF IN (Antenna input)
connector of the VCR.
RF IN (Antenna input)
connector of the VCR.
Connect the VCR´s RF OUT
(Antenna output) to the
television set’s antenna in
connector.
television set’s antenna in
connector.
Connect VCR and television
set to the AC mains supply.
set to the AC mains supply.
Follow the steps
described below.
Disconnect power to
all devices.
all devices.
You can connect the VCR to your TV set
by using a RF coaxial cable.
by using a RF coaxial cable.
VCR Auto Setup with RF Coaxial cable
D
Mind that a wrong date or time will influence the programmed
recording of TV programmes (don't forget to change summer time
and winter time).
recording of TV programmes (don't forget to change summer time
and winter time).
D
If the Country menu does not
appear after turning the device
on, you may reset the device to
its factory defaults (page 14).
Upon doing so the VCR Auto
Setup will start again.
appear after turning the device
on, you may reset the device to
its factory defaults (page 14).
Upon doing so the VCR Auto
Setup will start again.
The Country menu appears.
!
With the arrow buttons
select the according country, and
confirm with
ENTER.
Automatic tuning for all receivable TV stations begins.
Approximate duration is 5 minutes.
Approximate duration is 5 minutes.
If menu Clock set appears
If time and date are not transmitted by a TV station, they must be set
manually.
If time and date are not transmitted by a TV station, they must be set
manually.
!
Enter Time and Date with
or
...
, then
save with
ENTER.
1
2
3
0
(Automatic tuning)
8