Panasonic nv-mx350 Benutzerhandbuch
52
ª
Digital Effect Functions
≥It is not possible to use [MULTI], [P-IN-P], [WIPE], [MIX] or
[TRACER] of [EFFECT1] together with the digital modes of
[EFFECT2] on the [DIGITAL EFFECT] Sub-Menu.
[EFFECT2] on the [DIGITAL EFFECT] Sub-Menu.
≥If you have set [EFFECT2] to [B/W] or [SEPIA], changing
the selected White Balance Mode is not possible. (
l 23)
It is as follows when [GAINUP] is selected.
≥Manual Focus Mode
≥The shutter speed and White Balance cannot be operated.
≥The Sports Mode [
≥Manual Focus Mode
≥The shutter speed and White Balance cannot be operated.
≥The Sports Mode [
5] and the Portrait Mode [7] are
cancelled.
In the following cases, using the [EFFECT1] on the
[DIGITAL EFFECT] Sub-Menu is not possible.
≥When [PROGRESSIVE] is set to [ON] (
[DIGITAL EFFECT] Sub-Menu is not possible.
≥When [PROGRESSIVE] is set to [ON] (
l 50)
≥When the [REC MODE] is set to [FRAME]
In the following cases, using the Digital Effect Function
is not possible.
≥Card Mode
In the following cases, using the Digital Effect Function
is not possible.
≥Card Mode
Wipe Mode and Mix Mode
If either one of the following operations is carried out, stored
images will be erased, and Wipe and Mix Functions cannot
be used.
≥Use the Camera Search Function
≥Press the [STILL] Button
images will be erased, and Wipe and Mix Functions cannot
be used.
≥Use the Camera Search Function
≥Press the [STILL] Button
Picture-in-Picture Mode
≥If the Movie Camera is turned off, the smaller picture
disappears.
≥Titles cannot be inserted into the smaller picture.
Multi-Picture Mode
≥If the [MULTI] Button is pressed while self-recording Mirror
mode (
l 19) is used, the still picture is displayed from the
upper right corner of the screen, but, in reality, the picture
is recorded from the upper left corner as usual.
is recorded from the upper left corner as usual.
≥Multi Picture Mode cannot be used in Digital Still Picture
Mode.
≥The quality of Multi images deteriorates slightly.
≥The top and bottom of the Multi pictures will be cut off
≥The top and bottom of the Multi pictures will be cut off
slightly.
ª
Other Convenient Functions
Zebra Pattern
When the Surf & Snow Mode of Programme AE or Backlight
Compensation is used, the Zebra Pattern no longer serves
as the general reference for adjusting the brightness.
Compensation is used, the Zebra Pattern no longer serves
as the general reference for adjusting the brightness.
Microphone Sensitivity Level
When this setting is changed, the [AUDIO LEVEL] setting on
the [RECORDING SETUP] Sub-Menu of the [VCR
FUNCTIONS] Main-Menu will likewise be changed.
≥When Zoom Mic is set, set the zoom to the [T] position
the [RECORDING SETUP] Sub-Menu of the [VCR
FUNCTIONS] Main-Menu will likewise be changed.
≥When Zoom Mic is set, set the zoom to the [T] position
before performing this adjustment.
≥Select a lower setting for [GAIN] or set [MIC LEVEL] to
[AUTO].
≥It is recommended that you check through the headphones
before recording to ensure that the sound is not distorted.
Picture Adjustment
≥Settings once performed will remain valid so long as the
Mode Selector Switch is at the [MANUAL] setting. It is
therefore recommended that the Picture Adjustment be
checked prior to recording at the [MANUAL] setting.
therefore recommended that the Picture Adjustment be
checked prior to recording at the [MANUAL] setting.
≥During Picture Adjustment, holding down the [PUSH] Dial
for about 2 seconds returns the bar indication to the centre
of the monitor.
of the monitor.
ª
Playing Back
Repeat Playback
If you continue to push the Operation Lever towards [
1] for 5
seconds or longer, the Movie Camera switches to Repeat
Playback Mode, and the [R
Playback Mode, and the [R
!] Indication appears. (To
cancel Repeat Playback Mode, set the [OFF/ON/MODE]
Switch to [OFF].)
Switch to [OFF].)
Listening to Playback Sound through
Headphones
Headphones
If you want to use the headphones to listen to the playback
sound, set [AV JACK] on the [AV IN/OUT SETUP] Sub-Menu
to [OUT/PHONES] and connect the headphones to the
[PHONES] Socket (
sound, set [AV JACK] on the [AV IN/OUT SETUP] Sub-Menu
to [OUT/PHONES] and connect the headphones to the
[PHONES] Socket (
l 6) on the Movie Camera. In this case,
no sound (including a warning sound and shutter sound) will
be reproduced through the built-in speaker of the Movie
Camera.
be reproduced through the built-in speaker of the Movie
Camera.
Choosing Sound during Playback
You can select the sound by using the [AUDIO OUT] setting
on the [PLAYBACK FUNCTIONS] Sub-Menu.
STEREO:
on the [PLAYBACK FUNCTIONS] Sub-Menu.
STEREO:
Stereo Sound (main sound and sub sound)
L:
Left channel sound (main sound)
R:
Right channel sound (sub sound)
≥If you dub a tape recorded at the [12bit] selected as the
[AUDIO REC] on the [RECORDING SETUP] Sub-Menu,
playback sound becomes stereo sound regardless of the
[AUDIO OUT] setting if [12bit AUDIO] is set to [MIX].
playback sound becomes stereo sound regardless of the
[AUDIO OUT] setting if [12bit AUDIO] is set to [MIX].
ª
Index Search Functions
≥Index Search may not be possible at the beginning of tape.
≥Because Photoshot Index Signals are not recorded on still
≥Because Photoshot Index Signals are not recorded on still
pictures recorded in Continuous Photoshot Mode, the
Photoshot Index Search Function cannot be used for these
still pictures.
Photoshot Index Search Function cannot be used for these
still pictures.
≥Scene Index Search may not function properly if the
interval between 2 scene index signals is shorter than
1 minute.
1 minute.
ª
Playback Digital Effect Functions
≥Signals of images to which digital effects are added during
playback cannot be output from the DV Terminal (
l 6) or
Digital Still Picture Terminal (
l 38).
≥You cannot use the Wipe or Mix Function while playing
back the non-recorded portion of tape.
Multi-Picture Mode (VCR Mode)
≥The quality of Multi images deteriorates slightly.
≥Playback Multi-Mode screens cannot be output through the
≥Playback Multi-Mode screens cannot be output through the
DV Terminal (
l 6) or Digital Still Picture Terminal (l 38).
≥If there is input from DV Terminal, a multi screen cannot be
created.
≥When signals are input from S-Video Input/Output Socket
or Audio-Video Input/Output Socket, a Multi Screen cannot
be re-displayed.
be re-displayed.
≥Signals input from S-Video Input/Output Socket or Audio-
Video Input/Output Socket cannot be displayed on a Multi
Screen.
Screen.
≥If you switch the Movie Camera from the Index Multi-
Picture Mode over to the Camera Mode, the setting of
[SCAN MODE] on the [MULTI-PICTURES] Sub-Menu of
the [CAMERA FUNCTIONS] Main-Menu is automatically
set to [STROBE].
[SCAN MODE] on the [MULTI-PICTURES] Sub-Menu of
the [CAMERA FUNCTIONS] Main-Menu is automatically
set to [STROBE].
B-Text.fm 52 ページ 2002年1月11日 金曜日 午後7時28分