Panasonic p2hd ag-hpg20 Benutzerhandbuch

The calendar and time zone affect the management and playback sequence of the data content which 

has been recorded. Before recording, set and check year/month/day, time and time zone. (Page 27)

The manufacturer will not provide any compensation in the event that images fail to be recorded due to 

trouble while the unit and P2 card are being used.

You may use the images and sound which you have recorded for your own personal enjoyment only; 

under copyright laws, you may not use them for any other purpose without the permission of the 

copyright holders.

Be sure to observe the following when connecting the IEEE1394 cable (optional). (Improper connection 

may cause malfunction in this unit and external devices)

Before connecting or disconnecting the IEEE1394 cable, you must turn off the power of all devices 

connected to the unit. 

Devices equipped with earth terminals must be used in the grounded condition (or in the connected 

condition to the commonly-used GND).

When connecting the unit to a component which uses a 4-pin type of connector, be sure to connect this 

unit’s connector (6-pin type) first.

IEEE1394 cable connector has a direction.

When connecting the unit to a component which uses a 6-pin type of IEEE1394 connector, be sure to 

check the shape before connection as below

IEEE1394 

connector

IEEE1394 

cable edge

IEEE1394 

connector

(Wrong)

(Correct)

IEEE1394 

cable edge

During recording or playback in AVC-Intra100 and AVC-Intra50 modes, input/output from the DVCPRO/

DV input/output connector (IEEE1394) is not possible.

•

•

•

•

•

•

•

•

• Illustrations (portable recorder, menu screens, etc.) in these operating instructions differ slightly from the 

actual portable recorder.

• References are shown as (Page 15).

Each explanation, company names and product names described in these operating instructions are 
trademarks or registered trademarks of each company.