Panasonic p2hd ag-hpg20 Benutzerhandbuch

Seite von 120
6
Switching to the USB HOST mode
1
  Hold down [POWER] for at least 1 second to 
turn the power on.
The thumbnail screen now appears.
  Press [THUMBNAIL/MODE] to display the 
normal display screen.
  Press [MENU/MODE CHK].
  Using  ,   and  , select “OTHER 
FUNCTIONS” – “PC MODE SELECT”, and 
press  .
5
  Using   and  , select “USB HOST”, and 
press  .
6
  Press [MENU/MODE CHK] twice to display 
the normal display screen.
  Hold down [THUMBNAIL/MODE] for at least 
 seconds.
The USB HOST mode is now established, 
and “USB HOST” appears at the bottom of the 
thumbnail screen.
Use a hard drive with enough memory to 
accommodate the data to be copied.
 
To exit the USB HOST mode
1
  Hold down [THUMBNAIL/MODE] for at least 
 seconds.
The USB HOST mode is cancelled, and “USB 
HOST” disappears at the bottom right of the 
screen.
Usable hard drives
The following hard drive can be used.
Panasonic portable hard disk unit for P2 store (AJ-PCS060G)
Any hard drive which can be connected using USB 2.0
 
USB bus power (5 V, 0.5 A) is also supported, but some hard drives cannot be started up using it. If this 
is the case, supply power from a separate source to the hard drive.
Some hard drives may not operate properly.
Do not use USB memories or other removable media.
 


Copying data from P cards to the hard drive (continued)