Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Panasonic
  4. p2hd ag-hpg20
  5. Benutzerhandbuch

Panasonic p2hd ag-hpg20 Benutzerhandbuch

Download
Seite von 120
Editing
Editing data content on the P card (USB DEVICE mode)
You can connect a personal computer (Windows, Apple Macintosh) to this unit using a USB cable, and 
operate the contents on the unit’s P2 cards from the computer.
AG-HPG20
USB cable 
(optional accessory)
Personal 
computer
USB DEVICE connector 
(USB.0 Type B)
This unit
Editing in the USB DEVICE mode
The following conditions must be met when using a USB connection.
PCs mounted with Windows 2000 (SP4 or later version), Windows XP Professional (SP2 or later 
version), Windows Vista (Business or upgraded version) or Mac OS X10.4.8.
When making a USB connection for the first time, install the P2 software from the CD-ROM provided with 
the unit onto the PC.
This unit supports only USB 2.0. Use a USB 2.0-compatible PC.
Only one PC must be connected.
Operation will not be possible if a hub or other device is connected between the unit and PC. A USB 
cable more than 3 meters long must not be used. Otherwise, malfunctioning may occur.
 
•
•
•
•
•
Editing by means of external devices
1 
Hold down [POWER] for at least 1 second to 
turn the power on.
The thumbnail screen now appears.
 
Press [THUMBNAIL/MODE] to display the 
normal display screen.
 
Press [MENU/MODE CHK].
 
Using  ,   and  , select “OTHER 
FUNCTIONS”–“PC MODE SELECT”, and 
press  .
5 
Using   and  , select “USB DEVICE”, and 
press  .
6 
Press [MENU/MODE CHK] twice to display 
the normal display screen.
 
Hold down [THUMBNAIL/MODE] for at least 
 seconds.
After “USB DEVICE” is displayed, “USB 
DEVICE CONNECT” is displayed once the file 
access becomes possible.
The mode cannot be changed or menus 
cannot be displayed while the USB DEVICE 
mode is established.
Do not remove the P2 card while the USB 
connection is established.
•
•
 
Edit the data on the P card using the 
personal computer.
 
After the data has been edited, disconnect 
the USB cable.
The display on the LCD monitor changes from 
“USB DEVICE CONNECT” to “USB DEVICE 
DISCONNECT.”
When disconnecting the cable, perform the 
“safe removal of hardware” procedure at the 
personal computer.
10  
Hold down [THUMBNAIL/MODE] for at 
least  seconds.
   The normal display screen is restored.
While the USB connection is established, the 
P2 card access LEDs will light up only when 
accessed.
In the USB DEVICE mode, no signals can be 
output to an external monitor.
 
•
•
•
Saving data