Panasonic p2hd ag-hpg20 Benutzerhandbuch

: Normal playback

: Playback pause

REPEAT  : Repeat playback

1CLIP  : Single clip playback

1CLIP R  : Single clip repeat playback

  Rapid forward playback (rapid reverse playback)

  Forward frame feed playback (reverse frame 

feed playback)

   Forward variable-speed playback (reverse 

variable-speed playback)

  Forward clip feed (reverse clip feed)

This is displayed during easy playback from 
the hard drive. When playback performance 
deteriorates, the display blinks for 3 minutes. 
When the hard drive is damaged or vibrations 
are added to the hard drive, the display may 
become incorrect.

This appears when “ON” has been selected for 
the “REPEAT PLAY” item on the setting menu 
“PLAYBACK FUNCTIONS”.

As the remaining charge drops, the display 
changes in the following sequence: 

   

   

   

   and 

.

When the charge is low, “LOW BATTERY” 
appears on the LCD monitor.

 

(While the AC adapter is being used, a display 
other than 

 may appear: this is normal 

and is not a sign of trouble.)

The card slots in which P2 cards have been 
inserted and the basic information on the cards 
are displayed.

1 2

  Recordable P2 card

1 2

 

  P2 card targeted for recording

1 2

 

  Card recognition underway

 

  No card inserted

P  : Write-protected card

F  : No memory remaining

X  : Card cannot be recognized

E  :  Improperly formatted P2 card (which can be 

used if it is formatted properly)

The amount of memory remaining on the 
card in the slot targeted for recording is 
displayed when “ONE CARD” is selected for 
the “P2CARD REMAIN” item on the setting 
menu “DISPLAY SETUP”. The target slot 
can be switched to another slot using “SLOT 
SEL” assigned to [USER]. When “TOTAL” is 
selected, the total amount of memory remaining 
on the two cards is displayed.

When 

 is pressed, the level of the 

volume which is output from the speaker and 
headphone jack is displayed.
You can adjust the volume level using the   
and   buttons. 
During variable-speed playback, while holding 
down [ALT/3], press   and   button to adjust 
the volume.

This section provides major warning displays 
which are displayed on the LCD monitor. For other 
warning displays, check the displayed messages.

Data cannot be accessed because of a 
problem in the content or for some other 
reason. Restore the media or clips to the 
normal operating status, and then use the 
data.

An error occurred while accessing the P2 
card. Check the P2 card.

An error occurred while accessing the 
connection destination target. Check the 
hard drive status and connections.

Data cannot be deleted because of a 
mismatch in the content versions. Ensure 
that the same content version as the device 
is used.

The P2 card cannot be formatted because of 
a problem. Check the P2 card.