Panasonic p2hd ag-hpg20 Benutzerhandbuch

        The underlined settings are the factory mode settings.

This is used during playback to set whether to output VITC signal to the position set 

on the setting menu “VITC POS-1” or “VITC POS-2”.

Not output

Output

<Note>

This setting is effective only for VIDEO output and SD-SDI output.

This is used to set the insert position of VITC signal.

(When 59.94 Hz has been set)

  I

  I

(When 50Hz has been set)

  I

  I

<Note>

You cannot select the same line as the lines for “VITC POS-2” on the “TIMECODE 

SETUP” screen or “UMID POS” on the “AV OUT SETUP” screen.

This setting is effective only for VIDEO output and SD-SDI output.

•

•