Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Panasonic
  4. PT-DW7000U
  5. Benutzerhandbuch

Panasonic PT-DW7000U Benutzerhandbuch

Download
Seite von 116
61
How to use ADVANCED MENU
ADVANCED MENU
  DIGITAL CINEMA REALITY AUTO
  FORMAT
SMPTE
  BLANKING
  INPUT RESOLUTION
  CLAMP POSITION
  EDGE BLENDING
OFF
  SYNC.TERM
75 
  RASTER POSITION
     :MENU SELECT
     :CHANGE
MAIN MENU
         PICTURE
         POSITION
         ADVANCED MENU
         LANGUAGE
         OPTION
         TEST PATTERN
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select “ADVANCED MENU” with the
buttons.
Press “ENTER” button.
The ADVANCED MENU screen will be displayed.
Select “FORMAT” with the 
buttons.
Switch the signal format with the 
buttons.
• This toggles between SMPTE and BETACAM.
<Signal level>
Format
SMPTE
BETACAM
Y
700 mV
714 mV
Synchronous part
300 mV
286 mV
C
b
, C
r
±350 mV
±504 mV
• This function is available only when input signals are supplied through the analog RGB input module
(ET-MD95RGB). RGB1, RGB2 inputs do not support BETACAM signals.
• This function can be switched only when receiving the picture of 480i in the YCbCr mode.
It cannot be switched when receiving the picture of signals other than RGB-REALITY mode, RGB
mode and 480i.
• SMPTE is the factory default.
Note
• In DIGITAL CINEMA REALITY mode, the image quality will be deteriorated if 30p FIXED or 25p FIXED
is selected when the signal is not a 2:2 pulldown signal.
Note
ADVANCED MENU
  DIGITAL CINEMA REALITY AUTO
  FORMAT
SMPTE
  BLANKING
  INPUT RESOLUTION
  CLAMP POSITION
  EDGE BLENDING
OFF
  SYNC.TERM
75 
  RASTER POSITION
MAIN MENU
         PICTURE
         POSITION
         ADVANCED MENU
         LANGUAGE
         OPTION
DIGITAL CINEMA REALITY
Increase the vertical resolution when the PAL (or SECAM) 576i signal input or the NTSC 480i signal input is applied.
Procedure of adjustment
FORMAT (To input BETACAM with YCbCr 480i)
When receiving a picture of 480i with analog component signal YCbCr input, the input level of Cb and Cr can be switched.
Procedure of adjustment
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select “ADVANCED MENU” with the
buttons.
Press “ENTER” button.
The ADVANCED MENU screen will be displayed.
Select “DIGITAL CINEMA REALITY”
with the 
buttons.
OFF: 
Unforced cinema processing
AUTO:  Performs automatic detection and cinema
processing. (factory default) 
30p FIXED: Forced cinema processing (2:2
pulldown) is performed when a 480i
signal is input.
25p FIXED: Forced cinema processing (2:2
pulldown) is performed when a 576i
signal is input.