Panasonic PT-AX100U Benutzerhandbuch

1. Switch on the connected devices.

  Press the play button of the required device.

2.

Press the 

 button to select the 

required input method if needed.See "Input 
switching" on page 22.
  The image will be projected on the screen.

1. Press ASPECT to select the required aspect 

mode. See "ASPECT" on page 32.

2. Adjust the projected image with the Shift

lever. See "Lens shift and positioning" on 
page 16.

3. Adjust the angle of the projector.

  Screw down the Front leg adjuster and adjust 

the angle vertically.

4. Adjust the focus and the projected image 

size.

  Turn the Focus ring and Zoom ring to adjust 

the image.

  You can confirm the result with TEST

PATTERN.

NOTE:
  AUTO SEARCH is ON as default and the signal from the connected devices is detected automatically. See 

"AUTO SEARCH" on page 34.

NOTE:
  Do not touch the Air exhaust port as this may 

cause burns or injury.

  If keystone distortion occurs, see “KEYSTONE” 

on page 33.

Unlock