Panasonic PT-AX100U Benutzerhandbuch

Make sure the following accessories are provided with your projector.

Do not subject the projector to excessive vibration or shocks.
  The projector lens need to be handled with care.
  Cover the lens with the lens cover when transporting the projector.

Avoid setting up in places which are subject to 
vibration or shocks.
  The internal parts can be damaged, which may 

cause malfunctions or accidents.

Avoid setting up in places which are subject to 
sudden temperature changes, such as near an air 
conditioner.
  The life of the lamp may be shortened or the 

projector may be turned off. See “TEMP indicator” on 
page 36.

Do not set up the projector near high-voltage power 
lines or near motors.
  The projector may be subject to electromagnetic 

interference.

If installing the projector to the ceiling, ask a 
qualified technician to carry out all installation 
work.
  You will need to purchase the separate installation kit 

(Model No. ET-PKX100). Furthermore, all installation 
work should only be carried out by a qualified 
technician.

If using this projector at high elevations 
(above 1 400 m), set the ALTITUDE to HIGH. See 
“ALTITUDE” on page 35.
  Failure to observe this may result in malfunctions or 

the life of the lamp or the other components may be 
shortened.

Remote control (N2QAYB000064 x 1)

AA batteries for Remote control (x 2)

Power cord for continental Europe (K2CG3FR00001 x 1)