Panasonic pv-gs200 Benutzerhandbuch

Before Use

Use this mode when playing back the recorded 
scene on a tape.

Use this mode when recording a still picture or a 
moving picture on a card. (moving picture on 
PV-GS200 Model only)

Use this mode when playing back the recorded 
still picture on a card.

Use this mode when playing back the recorded 
moving picture on a card.

Use this mode when you want to connect the 
Camcorder to your Personal Computer.

ª Using the Viewfinder

Before using the Viewfinder, adjust the field of 
view so that the displays inside the Viewfinder 
become clear and easy to read.

≥The Viewfinder can also be pulled out for use.
≥Do not pull on the Eyecup to extend the 

Viewfinder.

To Use the Viewfinder at the Same Time as the 
LCD Monitor
Set [LCD/EVF] >> [EVF ON/AUTO] >> [ON].
≥The Viewfinder does not turn off even if the LCD 

Monitor is opened.

≥When you turn the Camcorder off, this setting is 

cancelled.

ª Using the LCD Monitor

With the LCD Monitor open, you can also record 
the picture while watching it.

the arrow.
≥The Viewfinder is now deactivated.

≥The LCD Monitor can be opened a maximum 

of 120

o. If you open the LCD monitor by 120o, 

it becomes convenient to operate menus or to 
play back pictures.

Adjust the LCD Monitor angle according to 
the desired recording angle.
≥The LCD Monitor can rotate a maximum of 

180

o 1 from the vertical position upwards 

and a maximum of 90

o 2 to the downward 

direction. Forcefully rotating the LCD Monitor 
beyond these ranges will damage the 
Camcorder. You cannot rotate the LCD 
Monitor when it is opened 120

o angle. 

Therefore, do not rotate it forcibly.

Closing the LCD Monitor
Push the LCD Monitor until it is securely locked.
≥Make sure the Card Slot Cover is closed.

ª Adjusting Brightness and Color Level

When [LCD/EVF SET] on the [LCD/EVF] 
Sub-Menu is set to [YES], the following items are 
displayed.

LCD Brightness [LCD BRIGHTNESS]
Adjusts the brightness of the image on the LCD 
screen.
LCD Color Level [LCD COLOR LEVEL]
Adjusts the color saturation of the image on the 
LCD screen.
Brightness of the Viewfinder 
[EVF BRIGHTNESS]
Adjusts the brightness of the image in the 
Viewfinder.

To Adjust
Press the [

;/∫] Button and select the item to be 

adjusted, and then press the [

6/5] Button to 

raise or lower the number of vertical bars in the 
Bar Indication.

        

290

o

1180

o

1LCD BRIGHTNESS
    [-]||||----[+]

 LCD COLOR LEVEL
    [-]||||----[+]

 EVF BRIGHTNESS
    [-]||||----[+]

 

;/∫:SELECT &/%:SETUP

            

!/MENU:EXIT

LCD/EVF SETUP

PV-GS120_200Eng.book  20 ページ  ２００４年２月１６日　月曜日　午後１時３２分