Panasonic pv-gs200 Benutzerhandbuch

With a PC

≥When the Camcorder is switched to the PC 

Mode while it is connected to the personal 
computer, “PC ACCESSING” is displayed on 
the Camcorder and the operation mode of the 
Camcorder cannot be switched. In this case, 
disconnect the USB Connection Cable. Switch 
the operation mode of the Camcorder and 
reconnect the Cable.

≥If the Camcorder is connected in the PC Mode, 

the [Removable Disk] icon representing the 
Memory Card drive is displayed in 
[My Computer].

≥When the Tape Recording Mode of the 

Camcorder is switched to the PC Mode, a 
warning message may be displayed. You may 
simply ignore it.

≥When you are using Windows XP or Windows 

2000, you may install or uninstall this software 
after logging ON by setting the user name to 
Administrator or to a user name having 
equivalent authority.

≥If you use Windows 98SE/Me, the message, 

“File is not found” may be displayed when the 
Camcorder is connected for the first time. Enter 
the following paths to complete the connection: 
If the message “MTDV98M3.pdr is not found” is 
displayed, enter 
“C:\WINDOWS\system\IOSUBSYS”. If the 
message “MTDV98M3.sys is not found” is 
displayed, enter 
“C:\WINDOWS\system32\DRIVERS”.
(The paths will differ depending on the 
environment of your personal computer.)

≥If you install the USB Driver while the USB 

Connecting Cable is being connected, or if you 
do not follow these Operating Instructions, the 
Camcorder will not be recognized correctly. In 
this case, delete the USB Driver from 
[Device Manager] as described below, uninstall 
the USB Driver, and re-install it.
1 Set the Camcorder to Tape Recording Mode 

or Tape Playback Mode, connect it to the 
personal computer, and delete [Panasonic 
DVC USB-SERIAL Driver for Win XX 
(COM X)] (or [Panasonic Serial USB Driver]) 
from [Device Manager].
The numeral designation after “Win XX” will 
differ depending on the OS. (Win 98, 
Win Me, Win 2000, Win XP)

2 Set the Camcorder to PC Mode and delete 

[Panasonic DVC SD Disk Drive] (or 
[Panasonic DVC USB Storage]) (Windows 
98SE).

ª About the SD Memory Card and 

SD Memory Card
The SD Memory Card (supplied) is virtually the 
same size as a MultiMediaCard. It is an external 
Memory Card that is available in larger 
capacities. It has a write protect switch to prevent 
data writing and card formatting, as well as a 
copyright protection function. 
≥SD Logo is a trademark.
MultiMediaCard
The MultiMediaCard is a compact, lightweight 
and removable external Memory Card.

≥All other company and product names in the 

operating instructions are trademarks or 
registered trademarks of their respective 
corporations.

Files recorded on a SD Memory Card or 
MultiMediaCard 
It may not be possible to play back the files on 
this Camcorder recorded on and created by other 
equipment or vice versa. For this reason, check 
the compatibility of the equipment in advance.

ª About the compatibility of the card 

Data files recorded on an “SD Memory Card” or a 
“MultiMediaCard” by this Camcorder conform with 
DCF (Design rule for Camera File system) 
established by JEITA (Japan Electronics and 
Information Technology Industries Association).
≥If you attempt to play back files recorded with 

this Camcorder on other equipment or to play 
back files recorded with other equipment on this 
Camcorder, you may not be able to play them 
back. Please check the compatibility with the 
other equipment in advance.

PV-GS120_200Eng.book  66 ページ  ２００４年２月１６日　月曜日　午後１時３２分