Panasonic pv-gs200 Benutzerhandbuch
Others
-72-
≥You can record still pictures on the card even if
the Shutter Chance Mark does not appear.
However, images may be recorded without
being focused.
However, images may be recorded without
being focused.
≥The Shutter Chance Mark does not appear or
may not be displayed in the following cases.
≥When the zoom magnification is high.
≥When the Camcorder is shaken.
≥When the subject is moving.
≥When the subject stands against the light
≥When the Camcorder is shaken.
≥When the subject is moving.
≥When the subject stands against the light
source.
≥When close subjects and far subjects are
included in the scene.
≥When the scene is dark.
≥When there is a bright part in the scene.
≥When the scene is filled with only horizontal
≥When there is a bright part in the scene.
≥When the scene is filled with only horizontal
lines.
≥When the scene lacks contrast.
RapidFire Consecutive Photoshot
≥One more still picture may be recorded after
≥One more still picture may be recorded after
you release the [PHOTO SHOT] Button.
≥The RapidFire Consecutive Photoshot and Title
Function cannot be used simultaneously.
≥When the [SELF TIMER] is set to [ON], the
Camcorder records the maximum number of
pictures recordable depending on the
[BURST MODE] setting.
pictures recordable depending on the
[BURST MODE] setting.
≥When using a card formatted by other
equipment, intervals between pictures may
become large.
become large.
≥If recording or erasing pictures is repeated
many times, intervals between pictures may
become large. In this case, back up your
important data on a PC, and format your card
using this Camcorder.
become large. In this case, back up your
important data on a PC, and format your card
using this Camcorder.
≥When the [PICTURE SIZE] is set to
[1760
k1320] (PV-GS200)/[1280k960]
(PV-GS120), the RapidFire Consecutive
Photoshot cannot be used.
Photoshot cannot be used.
≥Intervals between recording pictures may
become large depending on the card. We
recommend using Panasonic SD Memory Card.
recommend using Panasonic SD Memory Card.
ª Recording Moving Pictures (MPEG4)
(PV-GS200 only)
≥The following function is disabled:
≥Self-timer
≥If you record a subject illuminated with strong
light or a highly reflective subject, vertical lines
of light may appear.
of light may appear.
≥The sound is recorded in the monaural that is
mixed [L] and [R] of the stereo sound.
≥When playing back an MPEG4 moving picture
recorded by this Camcorder with other
equipment, black bars may appear at the top
and bottom of screen.
equipment, black bars may appear at the top
and bottom of screen.
≥MPEG4 moving pictures recorded in
[SUPERFINE] cannot be recorded on a
MultiMediaCard.
MultiMediaCard.
≥If you record wide images as MPEG4 moving
pictures when using line input or DV input, the
wide images are recorded in lengthwise style.
wide images are recorded in lengthwise style.
≥MPEG4 moving pictures may not be recorded
on a card formatted by other equipment (e.g.
PC).
PC).
ª Quick Start
≥During Quick Start Standby Mode, a minute
amount of electricity is consumed.
≥When the Camcorder is left in the Recording
Pause Mode for 5 minutes, it will switch to the
Quick Start Standby Mode. To turn the
Camcorder on again, set the [OFF/ON] Switch
to [OFF] and then set it to [ON] again. (The
Quick Start Mode will be restored.)
Quick Start Standby Mode. To turn the
Camcorder on again, set the [OFF/ON] Switch
to [OFF] and then set it to [ON] again. (The
Quick Start Mode will be restored.)
≥This Function is not activated in the following
cases:
≥A tape and a card is not inserted while in
Tape Recording Mode.
≥A Card is not inserted, while in Card
Recording Mode.
≥When you rotate the Mode dial or remove the
battery, Quick Start Recording Lamp is turned
off and Quick Start Mode is canceled. However,
if the Camcorder is turned on and the
Tape/Card Recording Mode is set, the Lamp
turns on and Quick Start Mode is restored.
off and Quick Start Mode is canceled. However,
if the Camcorder is turned on and the
Tape/Card Recording Mode is set, the Lamp
turns on and Quick Start Mode is restored.
≥If the [QUICK START] Button is pressed and
held for approximately 2 seconds during the
Quick Start Standby Mode, the Lamp will go off
and the Camcorder will be completely turned
off.
Quick Start Standby Mode, the Lamp will go off
and the Camcorder will be completely turned
off.
≥If the Camcorder is not operated for
approximately 30 minutes when the Quick Start
Recording Lamp lights, the Lamp will go off and
the Camcorder will be completely turned off.
Recording Lamp lights, the Lamp will go off and
the Camcorder will be completely turned off.
≥In the Automatic White Balance Mode, the color
may be recorded unnaturally at the beginning of
the recording.
the recording.
≥The zoom magnification differs from when it is
in the Quick Start Standby Mode and when the
recording starts.
recording starts.
ª Self-timer Recording
≥When [BEEP SOUND] on the [INITIAL]
Sub-Menu is set to [ON], the beep sound will be
emitted along with Recording Lamp flashing in
the Self-timer Standby Mode.
emitted along with Recording Lamp flashing in
the Self-timer Standby Mode.
≥By operating the [OFF/ON] Switch, Recording
Start/Stop Button or Mode Dial, the Self-timer
Standby Mode is cancelled. (In the case of
PV-GS120, the Self-timer Standby Mode is not
canceled even if you press the Recording
Start/Stop Button in the Card Recording Mode.)
Standby Mode is cancelled. (In the case of
PV-GS120, the Self-timer Standby Mode is not
canceled even if you press the Recording
Start/Stop Button in the Card Recording Mode.)
PV-GS120_200Eng.book 72 ページ ２００４年２月１６日 月曜日 午後１時３２分