Panasonic pv-gs200 Benutzerhandbuch
Others
-77-
ª Adding a Title
≥When set to MPEG4 Playback Mode, Title In
Function is not possible. (PV-GS200 only)
≥The Title In Function and Digital Effects cannot
be used simultaneously.
≥The Title In Function and RapidFire
Consecutive Photoshot cannot be used
simultaneously.
simultaneously.
≥When a title is displayed in Tape Playback
Mode, the title is not output from the DV
Terminal.
Terminal.
≥The Multi-Picture Mode cannot be used once
the title is inserted.
≥A full-colored title made on other equipment
cannot be played back or added to the picture
with this Camcorder.
with this Camcorder.
≥A title with size other than 640k480 pixels
cannot be displayed.
≥When recording of MPEG4 moving pictures is in
progress, Title in Function cannot be used.
(PV-GS200 only)
(PV-GS200 only)
≥When the title or the Multi screen is displayed,
recording and playback cannot be performed.
≥During external input or DV input, you cannot
use Title In Function or display titles on the Multi
screen. Select the desired titles to display them
on the screen before connecting the cable to
the Camcorder.
screen. Select the desired titles to display them
on the screen before connecting the cable to
the Camcorder.
ª DPOF
≥Perform the DPOF Settings with your
Camcorder.
≥Verifying the DPOF Settings may take a little
time. Wait until the [ACCESS] Lamp goes out.
ª Lock Setting
≥The Lock Setting carried out by this Camcorder
is only effective for this Camcorder.
≥The SD Memory Card has a write protection
switch on it. If the switch is moved to the [LOCK]
side, you cannot write to or format the Card. If it
is moved back, you can.
side, you cannot write to or format the Card. If it
is moved back, you can.
≥MPEG4 data recorded by another Camcorder
may not be able to cancel the lock setting.
(PV-GS200 only)
(PV-GS200 only)
ª Playing Back on Your TV
≥Depending on your TV, nothing may be shown
even if you correctly connect the Camcorder
with your TV. In this case, set [AV JACK] on the
[AV IN/OUT] or [INITIAL] Sub-Menu to [OUT].
with your TV. In this case, set [AV JACK] on the
[AV IN/OUT] or [INITIAL] Sub-Menu to [OUT].
≥If you set [AV JACK] on the [AV IN/OUT]
Sub-Menu to [IN/OUT], nothing will be shown
on the TV screen except during playback.
on the TV screen except during playback.
≥Picture size may be displayed differently when
playing back a Cinema picture on a wide-screen
TV with Playback Digital Effect.
TV with Playback Digital Effect.
≥We recommend setting the [SCREEN] on the
[DISPLAY] Sub-Menu to [NORMAL] when
playing back MPEG4 on TV. (PV-GS200 only)
playing back MPEG4 on TV. (PV-GS200 only)
ª Recording Pictures from a Card onto a
Tape
≥When recording the Card Image onto a Tape,
its size is transformed into 720
k480 pixels
according to the DV format.
≥If you attempt to record a still picture with a
large image size on a Tape, there may be a
reduction in the quality of the image.
reduction in the quality of the image.
≥The MPEG4 data cannot be recorded on a
Tape. (PV-GS200 only)
ª Audio Dubbing
≥The blank section of a tape cannot be dubbed.
≥Sounds sent through the DV Terminal cannot
≥Sounds sent through the DV Terminal cannot
be dubbed.
≥If a tape has a non-recorded portion when the
tape is dubbed, images and sounds may be
disturbed when this portion of the tape is played
back.
disturbed when this portion of the tape is played
back.
≥If you set the tape counter back to 0 at the
position where you want to stop Audio Dubbing
so as to make it possible to use the Memory
Stop Function (
so as to make it possible to use the Memory
Stop Function (
-84-
), Audio Dubbing is
terminated automatically when the tape reaches
this position.
this position.
≥In the case of importing data recorded with
Audio Dubbing to a PC using the PC’s software,
only the original sound (ST1) may be imported,
depending on the software.
only the original sound (ST1) may be imported,
depending on the software.
ª Recording the Contents of Other
Equipment
≥You cannot record on a tape when MPEG4
recording from external input signals is in
progress. (PV-GS200 only)
progress. (PV-GS200 only)
≥You cannot record on a card when recording on
a tape from external input signals is in progress.
Recording to a Card
If you set the Mode Dial to Card Recording Mode,
you can use the Photoshot function for external
input signals.
≥Black streaks may appear at the 4 edges of the
If you set the Mode Dial to Card Recording Mode,
you can use the Photoshot function for external
input signals.
≥Black streaks may appear at the 4 edges of the
image.
Analog-Digital Conversion
≥When the Camcorder is connected with other
≥When the Camcorder is connected with other
digital video equipment through its DV Terminal,
images recorded in analog form from other
external equipment can be output to the digital
video equipment through the DV Terminal.
images recorded in analog form from other
external equipment can be output to the digital
video equipment through the DV Terminal.
≥To DV-output analog video signals sent from
other equipment, set [DV OUT] on the
[AV IN/OUT] Sub-Menu to [ON]. (Normally,
keep the [DV OUT] set to [OFF]. If it is set to
[ON], the quality of the image may be
disturbed.)
[AV IN/OUT] Sub-Menu to [ON]. (Normally,
keep the [DV OUT] set to [OFF]. If it is set to
[ON], the quality of the image may be
disturbed.)
≥When using AV Cable and DV Cable (optional)
at the same time, detach the Grip Belt first for
easy connecting.
easy connecting.
PV-GS120_200Eng.book 77 ページ ２００４年２月１６日 月曜日 午後１時３２分