Panasonic pv-gs200 Benutzerhandbuch

Seite von 98
Others
-81-
≥Do not place a Cassette near highly magnetic 
substances or equipment.
≥The surface of the tape is covered with 
extremely minute magnetic particles, upon 
which signals are recorded. Magnetic 
necklaces, toys, etc., have a magnetic force that 
is stronger than you may expect, and they may 
erase the contents of a recording or may cause 
noise in images and sounds.
Card
≥When the Card is being read, do not remove the 
Card, turn off the power, or subject it to vibration 
or impact.
≥Do not leave the Card in places where there is 
high temperature or direct sunlight, or where 
electromagnetic waves or static electricity are 
easily generated.
≥Do not bend or drop the Card. The Card or the 
recorded content may be damaged.
≥After use, be sure to remove the Card from the 
Camcorder.
≥After usage, store the supplied SD Memory 
Card in the enclosed bag.
≥Do not touch the terminals on the back of the 
Card with your fingers. Do not allow dirt, dust or 
water to enter it.
≥Keep the Memory Card out of reach of children 
to prevent swallowing.
ª LCD Monitor/Viewfinder/Lens Hood
LCD Monitor
≥In a place with drastic temperature changes, 
condensation may form on the LCD Monitor. 
Wipe it with soft dry cloth.
≥If your Camcorder is extremely cold when you 
turn its power on, the image on the LCD Monitor 
is slightly darker than usual at first. However, as 
the internal temperature increases, it goes back 
to the normal brightness.
(PV-GS200)
Extremely high precision technology is 
employed to produce the LCD Monitor 
screen featuring a total of approximately 
123,000 pixels. The result is more than 
99.99% effective pixels with a mere 0.01% of 
the pixels inactive or always lit. However, 
this is not a malfunction and does not affect 
the recorded picture.
(PV-GS120)
Viewfinder
≥Do not direct the Viewfinder or Lens at the sun. 
Internal components may be seriously 
damaged.
≥To clean the inside of the Viewfinder, keep 
pressing 
1 and hold the Eyecup 2 and pull it 
out. 
Lens Hood
≥Attach the MC Protector (not supplied) or the 
ND Filter (not supplied) on the Lens Hood.
≥Do not attach anything other than the MC 
Protector (not supplied) or the ND Filter (not 
supplied) to the Lens Hood.
≥When you wish to attach the Tele Conversion 
Lens (not supplied) or Wide Conversion Lens 
(not supplied), first of all, turn the Lens Hood 
counterclockwise and take it off. Then attach 
the conversion lens by turning it clockwise. 
When you attach the Lens Hood back, insert 
into the slot 
2 and turn it clockwise.
≥If you push the [W/T] Lever toward [W] during 
recording with the filter and conversion lens 
attached together to the Camcorder, 4 corners 
of the image may become dark (vignetting). For 
details, please refer to the operating instructions 
of your accessories.
Extremely high precision technology is 
employed to produce the LCD Monitor 
screen featuring a total of approximately 
113,000 pixels. The result is more than 
99.99% effective pixels with a mere 0.01% of 
the pixels inactive or always lit. However, 
this is not a malfunction and does not affect 
the recorded picture.
Extremely high precision technology is 
employed to produce the Viewfinder screen 
featuring a total of approximately 123,000 
pixels. The result is more than 99.99% 
effective pixels with a mere 0.01% of the 
pixels inactive or always lit. However, this is 
not a malfunction and does not affect the 
recorded picture.
2
1
1
2
PV-GS120_200Eng.book  81 ページ  2004年2月16日 月曜日 午後1時32分