Panasonic pv-v453k Benutzerhandbuch

Video Cassette Recorder

For Basic operations, see the separate
“Basic Operations” instruction book.

- 12 -

REC         1 2 : 0 0AM
0 : 25

CH 02

-0 : 1 2 : 3 4 

SP

STEREO
SAP
MONO

Blank Tape/
No Video Signal Indications
When blank tape is detected during play,
or the current channel has no signal (with
Weak Signal Display feature (p. 10) set to
OFF), the TV screen will turn solid blue.

Function Status

Rec Time Remaining

(OTR mode only.
See p. 5 of Basic
Operations book.)

CH 0 8

Current Time

Channel

Tape Speed

(See p. 3 of Basic
Operations book.)

Broadcast Audio
Being Received

When a function button
is pressed, e.g. PLAY, or
you change channels,
a 5 second display
appears.

Counter

To display or remove
overlay at right,
➛ press DISPLAY*.

These displays will alert you to a missed
operation or provide further instructions.

OSD

Caution

Page

If you attempt to set or review a Timer
Recording and the Clock is not set...

After a Timer Program has been set...

If you press REC on the remote
control or VCR, and a cassette is
inserted with no record tab...

If you press PLAY, FF, REW, or REC
on the remote control or VCR without
a cassette inserted...

If you press POWER or STOP during
a Timer Recording...
(visible in VCR mode only)

If you press an invalid key on the
remote while in TV mode...

If head cleaning becomes necessary
while playing back a tape...

If you press a function button other
than STOP/EJECT or POWER while
the VCR is in VCR Lock mode...

See page 6, 7 of
Basic Operations
book

See page 6, 7 of
Basic Operations
book

See page 3 of
Basic Operations
book

See page 5 of
Basic Operations
book

See page 6, 7 of
Basic Operations
book

See page 3 of
Basic Operations
book

See page 10

See pages 2, 3, 10

*Important: If a remote control button does not work when pressed,

press the VCR button on the remote and try the button again.

- 11 -

- 10 -

1

2

Connect VIDEO OUT jack on Playing VCR to VIDEO IN jack on Recording VCR.
To monitor the dubbing, also connect a TV as shown.

Connect AUDIO L/R OUT jacks on Playing VCR to AUDIO L/R IN jacks on Recording VCR.

In place of a Playing VCR, you can use other equipment, such as a Camcorder.
Simply connect the unit’s Audio/Video outputs to the Recording VCR.

- 9 -

(Rear connection shown.)

VCR
(HiFi)

IN FROM ANT.

OUT TO TV

VIDEO OUT

AUDIO OUT

AUDIO IN

VIDEO IN

TV

VHF/UHF

R
L

R
L

R

L

R

VCR
(HiFi)

- 8 -

Multi-Brand Control Feature ..................................... 2
Advanced Connections (Cable/DSS) ....................... 3
MTS Broadcast ......................................................... 4
VHS Hi-Fi Stereo System ......................................... 5
Tape Operation .................................................... 6, 7
Copying Your Tapes (Dubbing) ............................... 9
Special VCR Features ........................................... 10
On-Screen Displays (OSD) .................................... 11
Before Requesting Service .................................... 12

LSQT0649A

Please read these instructions carefully before attempting to connect,
operate or adjust this product. Please save this manual.

Montréal: 3075 Louis A. Amos, Lachine, Québec H8T 1C4 (514) 633-8684
Toronto: 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-8447
Calgary: 6835 8th Street N.E., Calgary, Alberta T2E 7H7 (403) 295-3955
Vancouver: 12111 Riverside Way, Richmond, BC V6W 1K8 (604) 278-4211

Panasonic Canada Inc.
5770 Ambler Drive,
Mississauga, Ontario L4W 2T3
(905) 624-5010
www.panasonic.ca

Printed in Indonesia

LSQT0649A

S0203-0

No power…

TV program cannot be recorded...

Timer recording cannot be
performed…

There is no playback picture, or the
playback picture is noisy or contains
streaks...

During special effects playback,
picture may contain some vertical
jitter when using a TV with an
Automatic Vertical Hold Control...

VCR cannot be controlled...

Check the following points once again if you are having trouble with your VCR.

(BO : refers to “Basic Operations” Instruction book.)
(AO : refers to “Advanced Operations” Instruction book.)

• Completely insert Power Plug into an AC outlet.
• Set POWER button to on.
• Make sure power source is active.

Programs cannot be viewed on TV...

Video cassette cannot be inserted...

Video cassette cannot be removed...

Video cassette ejects when a
recording is started or the power is
turned off for timer recording...

In Stop mode, the motor
(CYLINDER) continues to rotate...

VCR cannot be remote controlled...

ACTION and PROG buttons do not
respond...

• Check connections between VCR, external antenna,

and TV.

• Check connections selection. (BO p. 4, AO p. 3)
• Make sure your antenna system (CABLE or TV) is

correctly set. (Channels [BO p. 11])

• Make sure cassette record tab is intact. (BO p. 3)

• Confirm that clock is set to current time and date.
• Make sure Cable/DSS box (if used) is left on and

tuned to channel to be recorded.

• Set recording start/stop times correctly. (BO p. 6, 7)
• Make sure VCR POWER button is pressed off. (BO p. 6, 7)
• Timer recording may not be performed or continued if

a power interruption occurs before or during a Timer
Recording, even after power is restored.

• Select channel 3 or 4 on TV to match VCR output

channel (3 or 4) (BO p. 4) or select LINE.

• Set VCR/TV selector to “VCR.”
• Adjust TRACKING control in either direction. (BO p. 3)
• Try Head Cleaning. (BO p. 3)

• Set TV’s Vertical Hold Control to MANUAL, then

adjust.

• Make sure VCR power is on.
• Check Remote batteries.
• Make sure VCR LOCK is set to off. (AO p. 10)
• Make sure Timer Record is not in progress.

• Make sure VCR power is on.
• Make sure Remote is in VCR mode.
• Aim Remote Control directly at remote sensor on

VCR. (BO p. 10)

• Avoid any object blocking signal path.
• Check Remote batteries. (BO p. 3)
• Make sure VCR LOCK is set to off. (AO p. 10)
• Exposing VCR remote sensor to direct fluorescent or

outdoor light may cause signal interference.

• Check connections between VCR, external antenna,

and TV.

• Press VCR button for VCR mode. (AO p. 2)
• Check Remote batteries. (BO p. 3)

• Make sure TV power is on.
• Make sure TV is set to output of VCR.
• Check connections between VCR, external antenna,

and TV.

• Set VCR/TV selector to “TV.” (BO p. 5, AO p.10)
• Make sure proper signal source is selected.

• Insert the cassette with window side up; record tab

facing you.

• Check if a tape is already in the unit.

• Confirm Power Plug is fully inserted into an AC outlet.

• Make sure cassette record tab is intact. (BO p. 3)

• To enable Quick play mechanism, the cylinder will

rotate for about 3 minutes. This reduces response
time from Stop to Play mode and from Play to Rewind
Search mode.

If Multi-brand feature is used (pages 2, 3), and
this feature is set to on, a warning appears
whenever an invalid key is pressed in TV mode.

• If “OFF,” remote

warning will not appear
if invalid key is pressed.

 to select

REMOTE WARNING
and press   to set ON
or OFF.

Press ACTION to display menu.

Press ACTION to return to normal screen.

The power shuts off at a preset time.

 to select

AUTO SHUT-OFF.
Press   repeatedly to
change shutoff time as
shown below.

Press ACTION to display menu.

• The shut-off countdown will not

function during Play or Record.

Press ACTION to return to normal screen.

REC

The VCR VCR/TV selection can be set to auto
or manual.

 to select

AUTO VCR/TV,
and press   to set ON
or OFF.

Press ACTION to display menu.

Press ACTION to return to normal screen.

• OFF(Manual): You select “VCR” or “TV”

mode using the VCR/TV
button on the unit or remote.

• ON(Auto):

“VCR” mode is automatically
set when VCR is turned on,
or in Play mode.

• For more on VCR/TV selection, see “Record

one station, watch another” and “Select
channels on VCR” sections (see p. 5 of Basic
Operations book).

*Important:

If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.

Insert pre-recorded tape.

Insert blank tape with record tab.

Press REC, then PAUSE/SLOW
immediately to enter REC/PAUSE mode.

Press INPUT* to set VCR Input mode to LINE
for Video Input. (See “Selecting the Input
Mode” below.)

Press PLAY to start dubbing.
Playing VCR starts playback.

Press PAUSE/SLOW to start dubbing.
Recording VCR starts recording.

Press STOP to stop dubbing.

Turn your TV on and tune to the
Recording VCR channel (CH3 or CH4).

Set the VCR/ TV Selector on the
Recording VCR to “VCR.”

• Dubbing tapes protected with Copy

Guard will have poor quality results.

Method 1:
Press INPUT repeatedly.
Channel Number 

↔

↔

↔

↔

↔ LINE

Method 2:
Press CH 

 /  .

Display will change as below.

• “L” lights on Multi-Function Display

(about 4 sec.) when LINE is selected.

Press STOP to stop dubbing.

Press PLAY, then PAUSE/SLOW
immediately to enter PLAY/PAUSE mode.

When set to “ON,” picture is displayed
regardless of signal strength.

Press     to select
and display CHANNEL.
Press 

 to select

WEAK SIGNAL
DISPLAY, and press

 to set ON or OFF.

Press ACTION to display menu.

VCR         CLOCK     CHANNEL

ANTENNA  :   CABLE
AUTO  SET

WEAK  SIGNAL   DISPLAY : OFF

SELECT   :            SET : 
EXIT        : ACT I ON     

When set to ON, all operations except for timer
record and tape eject are prohibited. Useful for
households with small children.

VCR  LOCK  ACT I VATED

VCR  LOCK  OFF

• VCR Lock cancels in 24 hours if clock is set.

To turn on, hold down
REC on the VCR in Stop
mode with no tape
inserted for 7 sec.
(Please ignore the NO
CASSETTE warning.)

To turn off, repeat
above.

VCR         CLOCK     CHANNEL

SELECT   :            SET : 
EXIT        : ACT I ON     

REPEAT  PLAY

: OFF

REMOTE WARNING

: ON

AUTO  SHUT- OFF

: OFF

AUTO  VCR/TV

: ON

IDIOMA/LANGUE : ENGLISH
VCR’ S  OUTPUT CH : 3

VCR         CLOCK     CHANNEL

SELECT   :            SET : 
EXIT        : ACT I ON     

REPEAT  PLAY

: OFF

REMOTE WARNING

: ON

AUTO  SHUT- OFF

: OFF

AUTO  VCR/TV

: ON

IDIOMA/LANGUE : ENGLISH
VCR’ S  OUTPUT CH : 3

VCR         CLOCK     CHANNEL

SELECT   :            SET : 
EXIT        : ACT I ON     

REPEAT  PLAY

: OFF

REMOTE WARNING

: ON

AUTO  SHUT- OFF

: OFF

AUTO  VCR/TV

: ON

IDIOMA/LANGUE : ENGLISH
VCR’ S  OUTPUT CH : 3

• “DETECTING TAPE

POSITION” only
appears the first time
a cassette is inserted
and it takes several
seconds for correct
indication to appear.

• The present tape

position indication is
displayed.

BEG I N                END

To find out the present tape position.
Tape position is displayed for VHS-C
Cassettes type, tapes under 30 minutes, and
some other tapes, but the position is not
correct.

Press TAPE  POSITION
to detect tape position.

DETECTING   TAPE   POSITION

Press TAPE  POSITION
to return to normal screen.

As an 

E

NERGY 

S

TAR 

®

 Participant,

Panasonic has determined that this product or
product model meets the 

E

NERGY 

S

TAR 

®

guidelines for energy efficiency.

1

2

3......

125

LINE

(CABLE)

69

(TV)

or

Press ACTION to return to normal screen.

• ON: Picture is displayed even if signal

is very weak but quality may be
poor.

OFF: Screen turns solid blue when signal

is weak or non-existent.

• Selecting ON has no effect on connected

equipment with blue back feature.

PV-453-K Ad-1 (E) (030206).p65

2003/02/13, 11:04

1

PV-453-K(E) LSQT0649A FRONT