Panasonic sl-s222 Benutzerhandbuch
Other Play Methods
Skip play
The disc plays from the specific track through to the
end, then play stops automatically.
end, then play stops automatically.
Preparation:
Put unit in stop mode.
1
2
Select the desired track.
3
Random play
1
2
For your reference:
≥
It is also possible to press [
9
] while the unit is in
stop mode to change the first track to be played. (All
tracks are played eventually, regardless of which is
played first.)
tracks are played eventually, regardless of which is
played first.)
≥
Program play is not possible in the random mode.
Resume play
This function allows you to listen from the beginning of
the track where play stopped because the unit was
powered off (or switched to stop mode). It is useful
when listening to CDs in the car, etc.
the track where play stopped because the unit was
powered off (or switched to stop mode). It is useful
when listening to CDs in the car, etc.
For your reference:
≥
If [RESUME, RANDOM, NORMAL] is put in the
[RESUME] position, the all-track repeat function will
be activated automatically as soon as the unit is pow-
ered on.
[RESUME] position, the all-track repeat function will
be activated automatically as soon as the unit is pow-
ered on.
≥
If power is cut off near the end of a track (off mode),
playback may resume from the beginning of the next
track.
playback may resume from the beginning of the next
track.
≥
If the unit is powered off while a disc was playing and
then a new disc is inserted, play will begin from the
middle of the new disc because the unit remembers
the position where play stopped on the previous disc.
then a new disc is inserted, play will begin from the
middle of the new disc because the unit remembers
the position where play stopped on the previous disc.
Release
Release
The letters such as
A
in the various illustrations refer to the descriptions in the “Location of Controls” section (see page 2).
Program play
Up to 24 tracks can be entered in the programmed se-
quence.
quence.
Preparation:
Put unit in stop mode.
1
2
Select the desired track.
3
Register in sequence.
(The indication “M” and the programmed se-
quence appear on the display.)
quence appear on the display.)
4
Repeat steps 2 and 3 to program all
the desired tracks.
the desired tracks.
5
∫
To program the same track in the se-
quence more than once
quence more than once
∫
After step 3, press [MEMORY/RECALL] desired
number of times.
number of times.
∫
If “
'
” is displayed
∫
No more tracks can be programmed.
∫
To confirm the contents of the program
∫
Press [MEMORY/RECALL] while the disc is playing.
(The number of the programmed tracks appear on
the display in sequence.)
(The number of the programmed tracks appear on
the display in sequence.)
∫
To delete the entire programmed se-
quence
quence
∫
Press [
∫
, OPR OFF].
Repeat function
Press during play or stop mode.
The setting is switched in the sequence indicated below
each time [
each time [
`
] is pressed.
1-track repeat (1
`
)
( ----------------]
One track is repeated.
|
v
|
All-track repeat (ALL
`
)
|
All the tracks on the disc are repeated.
|
v
|
Cancel (no indicator is shown)
===}
For your reference:
If [
`
] is pressed during program play, only the tracks
in the program are repeated.
(The indication “ALL” is not displayed.)
(The indication “ALL” is not displayed.)
Changing the sound quality
Press during play or stop mode.
The setting switches in the sequence indicated below
each time [S-XBS] is pressed.
each time [S-XBS] is pressed.
S-XBS
>
Cancel (no indicator is shown)
^========b
S-XBS:
Select this setting to boost the low-range response.
4
RESUME
L
RANDOM
NORMAL
:
9
6
5
A
P
D
RESUME
L
NORMAL
RANDOM
P
D
L
RESUME
RANDOM
NORMAL
NORMAL
RANDOM
L
RESUME
L
RESUME
RANDOM
NORMAL
RESUME
L
RANDOM
NORMAL
:
9
6
5
A
F
MEMORY/
RECALL
P
D
`
E
J
S-XBS
B
S-XBS