Panasonic SC-PM41 Benutzerhandbuch
12
RQT8043
Cassette tape – Play and record
TPS (Tape Program Sensor)
TPS (Tape Program Sensor)
This function enables you to search the beginning of a track,
up to a maximum of 9.
Press [4/REW/ 4] or [3/FF/¢] during play.
Play resumes from the track found.
up to a maximum of 9.
Press [4/REW/ 4] or [3/FF/¢] during play.
Play resumes from the track found.
TPS may not function properly with:
• Short silent parts
• Noise occurs between tunes
• Silent parts found within tunes
• Short silent parts
• Noise occurs between tunes
• Silent parts found within tunes
Before recording
Before recording
Preparation
Wind up the leader tape so that recording can begin
immediately.
Wind up the leader tape so that recording can begin
immediately.
• Use normal position tape.
• High position and metal position tape can be used, but this unit will
• High position and metal position tape can be used, but this unit will
not be able to record or erase them correctly.
Preparatory steps
Preparatory steps
For the United Kingdom and Continental Europe.
1
Insert the cassette to be recorded on.
""
Insert inside the
guides
guides
Forward side
The tape direction is automatically set to “
3
”.
To record on the reverse side
Press [TAPE
Press [TAPE
`] twice, then press [CLEAR
7
].
2
Press [PLAY MODE] to select the reverse mode.
Each time you press the button:
Each time you press the button:
=
=
One side only records.
Both sides are recorded (forward
= reverse).
“
” automatically changes to “
” when you press
[
¶REC/8].
For Australia and N.Z..
Insert the cassette to be recorded on.
To record on the reverse side
Turn the cassette over.
Turn the cassette over.
Basic play
Basic play
1
Press [OPEN
0] on top of the unit.
2
Insert a cassette.
""
Insert inside the
guides
guides
Forward side
3
Close the lid by hand.
For the United Kingdom and Continental Europe,
continue with steps 4 to 5.
continue with steps 4 to 5.
For Australia and N.Z., proceed to step 6.
4
Press [PLAY MODE] to select the reverse mode.
Each time you press the button:
Each time you press the button:
=
=
One side plays.
Both sides play (forward
Both sides play (forward
= reverse).
Both sides are played repeatedly until you press
[CLEAR
7].
5
Press
[
TAPE
`] to start play.
Each time you press the button:
3
: The forward side (front) plays.
2
: The reverse side plays.
6
Press
[
TAPE
3] to start play.
To play on other side of the cassette, turn the cassette
over.
over.
To
Action
stop tape playback
Press [CLEAR
7].
start one touch play
Press [TAPE
`] when the system is OFF
with the cassette loaded.
fast-forward and
rewind
rewind
Press [4/REW/4] or [3/FF/¢] in the
stop mode.
stop mode.
Top of the unit
Cassette lid
PM41_8043-1B.indd 12
PM41_8043-1B.indd 12
2/21/05 9:18:42 AM
2/21/05 9:18:42 AM