Panasonic sc-ns55db Benutzerhandbuch
RQTV0188
4
Step 1
Step 1
- Making the connections
- Making the connections
Connect the AC mains lead only after all other connections have been made.
Getting started
To household
mains socket
mains socket
3
Connect the speaker cables.
2
Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a
position with least amount of interference.
position with least amount of interference.
4
Connect the AC mains lead.
READ THE CAUTION FOR THE AC MAINS
LEAD ON PAGE 3 BEFORE CONNECTION.
LEAD ON PAGE 3 BEFORE CONNECTION.
The included AC mains lead is for use with this unit
only. Do not use it with other equipment.
only. Do not use it with other equipment.
Insertion of connector
Connector
Red (
ª)
Black (
·)
Red (
ª)
Black (
·)
Even when the connector is perfectly inserted,
depending on the type of inlet used, the front part of
the connector may jut out as shown in the drawing.
However there is no problem using the unit.
depending on the type of inlet used, the front part of
the connector may jut out as shown in the drawing.
However there is no problem using the unit.
Appliance inlet
Incorrect connection can damage the unit.
Adhesive
tape
tape
FM indoor
antenna
antenna
1
Connect the DAB “T” antenna
The cross bar of the T should be kept fi rmly stretched.
Find a position with good reception.
There is a function on the unit to check signal quality.
Find a position with good reception.
There is a function on the unit to check signal quality.
For best reception
A DAB outdoor antenna is recommended (
A DAB outdoor antenna is recommended (
➡ page 5).
Adhesive tape
Be sure to fully
tighten the screw.
tighten the screw.
NS55DB_EB_EN.indd 4
NS55DB_EB_EN.indd 4
4/2/07 12:15:33 PM
4/2/07 12:15:33 PM