Panasonic sc-pm91d Benutzerhandbuch

26

RQT7937

Only when disc or tape is selected as the source
To save power, the unit turns off if it is left unused for 10 minutes.

“A.OFF” is shown on the display.
This function does not work if the source is tuner or AUX.

To cancel
Press [SHIFT]+[AUTO OFF] again to clear “A.OFF” from the display.

For your reference
“A.OFF” remains displayed if disc or tape is selected as the source.

Use this when you are going to sleep or any other time you would prefer 
to dim the display panel.

To return to the original brightness, press [SHIFT]+[DIMMER] again.

Volume is reduced to minimum.

To cancel
Press [MUTING] again or reduce the volume to minimum, then raise it to 
the required level.
Muting also cancels when you switch the unit to standby.

This timer turns the unit off after a set time.

Every time you press the button:

   SLEEP 30     SLEEP 60      SLEEP 90    SLEEP 120     SLEEP OFF

To cancel the sleep timer
Press [SHIFT]+[SLEEP] to select "SLEEP OFF".

To confirm the remaining time
Press [SHIFT]+[SLEEP] once.
The remaining time is shown for about 5 seconds.

To change the setting
Press [SHIFT]+[SLEEP] to select the new setting.

You can use the sleep timer in combination with the play/record timer.
Make sure the unit is off before the play/record timer’s start time.

The sleep timer will be turned off when you start recording from a disc.

You can enjoy higher quality audio by stopping the video output.
During play

•  AUDIO ONLY cancels if you press [SHIFT]+[A.ONLY] again or switch 

the unit to standby.

•  There is output to the screen only when:

–  the disc is stopped.

–  performing operations such as searching.

–  on screen display is displayed.

The feature may not work depending on the discs’ recording.

Discs recorded with multi channels LPCM at 44.1 kHz or 48 kHz
This feature gives you a more natural sound by adding the higher 
frequency signals not recorded on the disc.

Discs recorded at 44.1 kHz or 48 kHz
This feature reproduces the frequencies lost during recording to give you 
a sound closer to the original.

Setting

Type of music

Effect level

1

High tempo (e.g., pops and rock)

Light

2

Various tempos (e.g., jazz)

Medium

3

Low tempo (e.g., classical)

Strong

Off

Off

Off

The actual output sampling frequency depends on the PCM Digital 
Output setting (➡PCM Digital Output, page 21) when using a digital 
connection (➡ Home Theater — Enjoying more powerful sound, page 
30).

➡

SC-PM91D EB.indd   26

3/18/2005   2:18:48 PM