Panasonic sc-pm91d Benutzerhandbuch

Seite von 36
35
RQT7937
Specifications
Specifications
AMPLIFIER SECTION
RMS Output Power Stereo mode (Both channel driven)
  10% total harmonic distortion
     1 kHz 
(Low channel) 40 W per channel (6 Ω)
     8 kHz 
(High channel) 40 W per channel (6 Ω)
    Total RMS Stereo mode power 
160 W
DIN Output Power Stereo mode (Both channel driven)
    10% total harmonic distortion
     1 kHz 
(Low channel) 35 W per channel (6 Ω)
     8 kHz 
(High channel) 35 W per channel (6 Ω)
    Total DIN Stereo mode power 
140 W per channel
PMPO Output power 
1600 W
Phone jack terminal 
Stereo, 3.5 mm jack
MIC 
0.7 mV, 680 Ω, Stereo, 3.5 mm jack
FM TUNER SECTION
Frequency range 
87.50 – 108.00 MHz (50 kHz step)
Sensitivity 
1.6 µV (IHF)
  S/N 26 dB 
1.5 µV
Antenna terminals 
75 Ω (unbalanced)
Preset stations 
15
AM TUNER SECTION
Frequency range
 
   
522 – 1629 kHz (9 kHz steps)
 
   
522 – 1629 kHz (9 kHz steps)
   
 520 – 1630 kHz (10 kHz steps)
Sensitivity
  S/N 20 dB at 999 kHz 
 560 µV/m
  Image rejection at 999 kHz 
 40 dB
Preset stations  
15
CASSETTE DECK SECTION
Track system 
4-track, 2-channel
Heads 
  Record/playback 
Solid permalloy head
  Erasure 
Double gap ferrite head
Motor 
DC servo motor
Recording system 
AC bias 100 kHz
   
AC erase 100 kHz
Tape speed 
4.8 cm/sec
Overall frequency response (+3, –6 dB) at DECK OUT
  Normal 
35 Hz – 14 kHz
S/N ratio 
50 dB (A weighted)
Wow and flutter 
0.18% (WRMS)
Fast forward and rewind time 
Approx. 120 seconds with 
   
C-60 cassette tape
DISC SECTION
Discs played [8 cm or 12 cm]
(1)  DVD-RAM (DVD-VR compatible, JPEG formatted disc)
(2)  DVD-Audio
(3)  DVD-Video
(4)  DVD-R (DVD-Video compatible)
(5)  DVD-RW, +R, +RW
(6)  CD-Audio (CD-DA)
(7)  Video CD
(8)  SVCD (Conforming to IEC62107)
(9)  CD-R/CD-RW
 
(CD-DA, Video-CD, SVCD, MP3, WMA, JPEG formatted disc)
(10) MP3/WMA
1
• 
Compatible compression rates: 
  MP3: between 32 kbps and 320 kbps
  WMA: between 48 kbps and 320 kbps
(11) JPEG
1
• 
Exif Ver 2.1 JPEG Baseline files
• 
Picture resolution:
   
between 320 x 240 and 6144 x 4096 pixels
   
(Sub sampling is 4:2:2 or 4:2:0)
(12) HighMAT Level 2 (Audio and Image)
(13) HDCD
The total combined maximum number of recognizable audio and 
picture contents and groups: 4000 audio and picture contents and 
400 groups.
Audio output
  Number of channels 
2
Digital audio output
  Optical digital output 
Optical terminal
Pick up
  Wavelength
     DVD 
662 nm
     CD 
785 nm
Laser power 
CLASS 2/CLASS 3a
 
NORSK
  Bølgelengde
     DVD 
662 nm
     CD 
785 nm
 
Laserstyrke 
Ingen farlig stråling sendes ut
VIDEO SECTION
Video system 
PAL625/50, PAL525/60, NTSC
Composite video output
  Output level 
1 Vp-p (75 Ω)
  Terminal 
Pin jack (1 system)
S-VIDEO output
  Y output level 
1 Vp-p (75 Ω)
  C output level 
0.3 Vp-p (75 Ω) (PAL)
   
0.286 Vp-p (75 Ω) (NTSC)
  Terminal 
S terminal (1 system)
RGB video output
  R output level 
0.7 Vp-p (75 Ω)
  G output level 
0.7 Vp-p (75 Ω)
  B output level 
0.7 Vp-p (75 Ω)
  Terminal 
SCART jack
Component video output (480P/480I)
  Y output level 
1 Vp-p (75 Ω)
  P
B
 output level 
0.7 Vp-p (75 Ω)
  P
R
 output level 
0.7 Vp-p (75 Ω)
  Terminal 
Pin jack (Y:green, PB: blue, PR:red)(1 system)
SPEAKER SECTION
Type 
3 way, 3 speaker system (Bass reflex)
Speaker units
  Full range 
10 cm cone type
  Tweeter 
6 cm cone type
  Super tweeter 
Dome type
Impedance
  High 
6 Ω
  Low 
6 Ω
Input power (IEC) 
80 W (Max)
Output sound pressure level 
80 dB/W (1.0 m)
Crossover frequency 
3 kHz, 10 kHz
Frequency range 
42 Hz–50 kHz (–16 dB)
   
52 Hz–45 kHz (–10 dB)
Dimensions (WxHxD) 
145 x 249 x 225 mm
Mass 
2.34 kg
GENERAL
Power supply 
   
AC 230 V, 50 Hz
   
AC 230–240 V, 50 Hz
   
   
AC 110 V/127 V/220–240 V, 50 Hz
Power consumption 
   
140 W
   
145 W
Dimensions (WxHxD) 
175 x 248 x 388 mm
Mass 
   
5.8 kg
   
5.9 kg
Operating temperature range  + 5°C to + 35°C (+ 41°F to + 95°F)
Operating humidity range 
5% to 90% RH (no condensation)
Power consumption in standby mode 
 
0.5 W
 
0.6 W
1. Specifications are subject to change without notice.
  Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum analyzer.
3. The labels “HIGH (HF)” and “LOW (LF)” on the rear of the speakers 
refer to High frequency and Low frequency.
For the Middle East and Southeast Asia
For the United Kingdom, Continental Europe, Australia and N.Z. 
For the Middle East and Southeast Asia
For the United Kingdom and Continental Europe
For Australia, N.Z., the Middle East and Southeast Asia
For Continental Europe
For the United Kingdom, Australia and N.Z. 
For the Middle East and Southeast Asia
Note
For the United Kingdom, Continental Europe, Australia and N.Z. 
For the Middle East and Southeast Asia
For the United Kingdom, Continental Europe, Australia and N.Z. 
For the Middle East and Southeast Asia
For the United Kingdom, Continental Europe, Australia and N.Z. 
For the Middle East and Southeast Asia
For the United Kingdom, Continental Europe, Australia and N.Z. 
For the Middle East and Southeast Asia
SC-PM91D EB.indd   35
3/18/2005   2:18:59 PM