Panasonic th-37pa20m Benutzerhandbuch

S VIDEO VIDEO

AV 3

L R

PC

COMPUTER

Conversion adapter 
(if necessary)

RGB

D-sub 15p

Stereo plug

PC cable

Connect a cable which matches
the audio output terminal on the computer.

Less than

4" (10 cm)

Ferrite core (Small size)

(supplied)

Ferrite core (Large size)
(supplied)

Audio

Less than

4" (10 cm)

Less than

4" (10 cm)

(1) Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical

scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)

(2) The display resolution is a maximum of 640 

×

 480 dots when the aspect mode is set to “4:3”, and 852 

×

 480 dots

when the aspect mode is set to “16:9”. If the display resolution exceeds these maximums, it may not be possible
to show fine detail with sufficient clarity.

(3) Some PC models cannot be connected to the set.
(4) There is no need to use an adapter for computers with DOS/V compatible D-sub 15P terminal.
(5) The computer shown in the illustration is for example purposes only.
(6) Additional equipment and cables shown are not supplied with this set.
(7) Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified

frequency range.

(8) The Sound of the PC mode is combined with the Audio signal of AV3.

Pin Layout for PC Input
Terminal

Pin No.

Pin No.

Pin No.

Signal Name

R

G

B

NC (not connected)

GND (Ground)

Signal Name

GND (Ground)

GND (Ground)

GND (Ground)

NC (not connected)

GND (Ground)

Signal Name

NC (not connected)

NC

HD/SYNC

VD

NC

1

6

7

8

3

9

4

5

10

15 14 13 12 11

2