Panasonic ty-fb7ta Benutzerhandbuch
4
English
SERIAL
PC IN
AUDIO
SERIAL
PC IN
AUDIO
Ir System
Installation
1.Remove the slot cover.
2.Insert the terminal board
until it is firmly plugged
into the connector.
Tighten screws in the
order
into the connector.
Tighten screws in the
order
1
-
4
.
3.Affix the terminal
function label
(included).
(included).
To install
Remove the slot cover. Grip
the handle of the terminal
board, and slowly pull out in
the direction of the arrow.
the handle of the terminal
board, and slowly pull out in
the direction of the arrow.
To remove
Securing screw
Compatible slot Nos. are SLOT1 and SLOT2.
SLOT3 is not compatible.
Precautions
• Before installation
• Before installation
Turn the power switch off and disconnect the power supply plug of the display. Disconnect all other plugs
connected to the display.
connected to the display.
• Before removing, turn the power off with the tuner board’s remote control and then turn the main power of
the display off.
• When installing or removing the terminal board, exercise care to avoid injury.
There may be some sharp-pointed solder joints on the rear side of the board that could cause unexpected injury.
• When installing the board, fully insert the Board into the slot horizontally until it is firmly plugged into the
connector.
Note that incomplete insertion may damage the internal components.
Note that incomplete insertion may damage the internal components.
Foam mat or thick soft cloth
37 inch model
42 / 50 / 65 inch model
• Terminal function label
SLOT2
SLOT3
SLOT1
SLOT2
SLOT1
SLOT3
• Make sure that the Board does not ride on the two lower claws.
• Be sure to fasten all screws tightly.
• Have the customer keep the removed Terminal Board for future servicing needs.
• Be sure to fasten all screws tightly.
• Have the customer keep the removed Terminal Board for future servicing needs.