Panasonic vw-dtm21e Benutzerhandbuch
44
Suggestions and
requirements (DV
Interface Card)
Read carefully before connecting the card.
■ Precautions to be taken when connecting
the card
● The card insertion and removal procedure
depends upon the type of PC. Carefully read
the PC manual.
the PC manual.
● When installing the DV Interface Card on a PC
equipped with i.LINK terminal and performing
video editing, a message will be displayed to
confirm where the digital video device is
connected. Select [Yes] or [No] according to
the type of connection.
video editing, a message will be displayed to
confirm where the digital video device is
connected. Select [Yes] or [No] according to
the type of connection.
● Don't install the card on the PC when the DV
cable is connected, otherwise faults might
occur.
occur.
● Check the card direction when inserting it. If it
is not inserted properly, faults might occur both
in the card and in the PC.
in the card and in the PC.
● If you connect 2 digital video devices to the PC
use 2 DV Interface Card terminals. You cannot
perform the editing using the PC i.LINK
terminal and the card terminal one at a time.
perform the editing using the PC i.LINK
terminal and the card terminal one at a time.
● If you use a PC with a 2-level card slot, insert
this card in the upper slot. If you insert it in the
lower slot, you'll be unable to insert any other
PC card. (However some PC cards cannot be
used in conjunction with this card due to their
shape.)
lower slot, you'll be unable to insert any other
PC card. (However some PC cards cannot be
used in conjunction with this card due to their
shape.)
● You cannot install 2 cards like this at the same
time.
■ Checking whether the card has been
recognized
Check whether the card has been properly
recognized by the PC with the following
procedure.
1 Right-click on [My computer] and select
recognized by the PC with the following
procedure.
1 Right-click on [My computer] and select
[properties]
2 Click on the [Device Manager] tab
3 Double-click on the [1394 Bus Controller] icon
3 Double-click on the [1394 Bus Controller] icon
If [Texas Instruments OHCI Compliant
IEEE1394 Host Controller] is displayed, the
card has been properly installed
IEEE1394 Host Controller] is displayed, the
card has been properly installed
■ Using and maintaining the card
● Don't wet or bind the card, don't let it fall to the
ground and avoid hard knocks.
● Don't store the card in hot or dusty places, or in
places exposed to direct sun radiation.
● Don't disassemble or modify the card.
● The correct image display depends upon the
computer and upon the environment where it is
used.
used.