Panasonic WJ-HD316 Benutzerhandbuch

Seite von 164
89
Switcher
Monitor1
Perform the settings for the image switching on monitor 1 such as the setting of
the sequential display or the screen to be displayed at login on monitor 1.
Monitor 2
Perform the settings for the image switching on monitor 2 such as the setting of
the sequential display or the screen to be displayed at login on monitor 2.
Display
OSD Setup
Perform the display settings such as the settings for the display position of the
camera title and the time.
Monitor1
Perform the display settings for monitor 1 such as the camera title display on/off,
the alarm display on/off and the time display on/off.
Monitor2
Perform the display settings for monitor 2 such as the display mode (task bar
style), the camera title display position, and the camera title display on/off.
Comm
Camera Control
Set the communication type to control cameras for each camera channel.
PS·Data Setup
Perform the settings for the PS·Data. It is necessary to perform these settings
when connecting an external device such as a controller to the DATA port on the
rear panel of this unit.
RS485 Setup
Perform the settings for the RS485. It is necessary to perform these settings when
connecting an RS 485 compatible camera to the RS485 (CAMERA) port on the
rear panel of this unit.
RS232C Setup
Perform the settings for the SERIAL (RS232C). It is necessary to perform these
settings when connecting a PC to the SERIAL connector on the rear panel of this
unit.
NW Setup 1
Perform the basic network settings. It is necessary to perform these settings when
operating this unit via a network such as a LAN. The settings for the user authenti-
cation and the host authentication can also be set with these settings.
NW Setup 2
Perform the network connection settings such as IP addresses and the gateway
address. It is necessary to perform these settings when operating this unit via a
network such as a LAN.
NTP Setup
Perform the NTP server settings such as the NTP server address and the time
zone setting. It is necessary to synchronize the clock with the NTP server.
System
Basic Setup
Perform the settings for the basic operation of this unit.
Time & Date
Perform the settings for the time adjustment and display of the time and date.
User Regist.
Perform the settings for the user registration and the user authentication such as
user name, password and operational level.
User Edit
Edit the registered user information.
User Delete
Delete registered users.
Host Regist.
Register the hosts (PCs access this unit via a network) with their information such
as IP address and operational level for the host authentication.
Host Edit
Edit the registered hosts.
Host Delete
Delete the registered hosts.
User Level
Perform the settings to specify operable functions for each level.
Save/Load
The set contents can be saved or loaded.
Note: Refer to page 125 for further information about the settings using the setup menu of camera.
Settings menu
Description
Page
108
110
111
112
113
114
114
115
116
117
117
118
119
120
121
122
122
122
123
123
123
124