FIC mb02 Servicehandbuch
Maintenance & Disassembly
5-12
FIC MB02 Service Manual
Figure 5-14 Removing the eleven screws of bottom case
5.5.8 Removing / Replacing the Motherboard
The motherboard contains the major chipset and components needed to run the MB02
notebook. Follow the steps below on how to remove and replace the motherboard:
1. Before removing the motherboard, you need first to disassemble the all basis unit
modules mentioned in the previous sections.
2. On the motherboard, there are two screws and one hex bolt . Remove these hex bolts and
screws.
Figure 5-15 Motherboard Screws Location
3. When all screws ,bolts, slowly detached the main board from the base unit casing. Notice
the close gap between the volume control knob and button case and may use the specific
tooling to separate them more easily.
tooling to separate them more easily.
PDF created with FinePrint pdfFactory trial version