Panasonic WV-CP150 Benutzerhandbuch
-11-
Following explanation for installing the camera mount-
ing bracket is for the installation on the wall (A and B),
but also applies equally to the installation on the ceil-
ing, a shelf and stand.
ing bracket is for the installation on the wall (A and B),
but also applies equally to the installation on the ceil-
ing, a shelf and stand.
1. Install the camera mounting bracket on the wall
with 2 screws.
Note:
The coaxial cable can be passed through
the center hole of the camera mounting brack-
et.
et.
Coaxial Cable
Fixing Screw
Camera Mounting
Bracket
Bracket
INSTALLATION PROCEDURE
SUPER
DYNAMIC
Angular Control Screw
2. Insert the camera fixing
screw into the camera
mounting hole and
tighten the screw firmly.
mounting hole and
tighten the screw firmly.
SUPER
DYNAMIC
3. Connect the camera and monitor with the coaxial
cable and turn on the power switch of the monitor.
4. While viewing the monitor picture, loosen the
angular control screw slightly. Adjust the camera’s
angle to the desired position, and then tighten the
screw firmly.
angle to the desired position, and then tighten the
screw firmly.