FIC a440 Servicehandbuch

 

Maintenance & Disassembly 

 
FIC A440 Series Service Manual 

5-7

 

5.5

5.5

5.5

5.5    Parts 

Removal 

Parts Removal 

Parts Removal 

Parts Removal and Replacement Procedures

and Replacement Procedures

and Replacement Procedures

and Replacement Procedures    

This section contains the field service-level removal/ replacement procedures for the 
notebook. The notebook is designed for optimum modularity in order to make field 
replacement and maintenance easy and efficient. 

5.5.1  Removing the Battery Pack 

The procedure for removing and replacing the battery pack is as follows: 
 
1.  The battery pack is located on the right side of the system unit.  

2.  To release the battery pack, locate the battery latch found underneath the unit. 

3.  Push the latch to release the lock and at the same time pull the battery pack out.  

4.  To replace the battery pack, simply slide in the battery pack until the latch snaps in. 

5.5.2 Removing the Glidepad 

The glidepad module is assembled underneath the palm-rest cover case. Follow the procedure 
below on how to remove the module: 
 

 

 

 

 

1.  Remove the three screws mounted on the palm-rest assembly found underneath the unit. 

2.  Slowly remove the palm-rest cover by unsnapping the sides from the system base unit, 

starting at the right corner panel. 

3.  Slowly lift the cover case, and you will find a cable connected from the glidepad to the 

First unsnap 
panel at right 
corner 

Glidepad 
module 

Palm-rest 
panel/cover 

Glidepad 
connector 

Audio 
Board