DELL powervault e03j001 Benutzerhandbuch

Seite von 70
Operating Your Storage Enclosure
19
Operating Your Storage Enclosure
Before You Begin
Before connecting your storage enclosure, ensure that the following are 
available:
Power cables
SAS cables
Rail kit
Dell Systems Management Tools and Documentation media
Documentation
Getting Started Guide
Rack Installation Instructions
Safety instructions
Cabling Your Enclosure 
You can cable your enclosure in either a unified-mode configuration or in a 
split-mode configuration.
In a unified-mode configuration your enclosure is connected to one host, 
for example, a server with a controller card. Your enclosure can be one of 
up to four enclosures daisy-chained to a single port on the controller card 
in your host server. The enclosure can also be connected in a redundant 
path mode with two connections to single host server. See Figure 2-2 and 
Figure 2-3 for cabling diagrams of a unified mode configuration.
In a split-mode configuration, your enclosure is connected to two separate 
controller cards. The controller cards may reside in the same server or in 
two different servers. The enclosure bus is logically split in half where the 
first half of the enclosure is managed by one controller and the second half 
of the enclosure is managed by the second controller. Table 2-1 lists the 
book.book  Page 19  Monday, December 7, 2009  4:51 PM