Gateway 7001 Series Benutzerhandbuch
136
www.gateway.com
5
Enable the
Validate server certificate
option, then select the name of the certificate you
downloaded for this client in step 4 of the previous procedure. For more information,
see
see
6
Click
OK
on each dialog box to close and save the settings.
Connecting to the wireless network with an IEEE 802.1x client using a certificate
IEEE 802.1x clients should now be able to connect to the access point using their TLS
certificates. The certificate you installed is used when you connect, so you will not be
prompted for login information. The certificate is automatically sent to the RADIUS server
for authentication and authorization.
certificates. The certificate you installed is used when you connect, so you will not be
prompted for login information. The certificate is automatically sent to the RADIUS server
for authentication and authorization.
Association Tab
Network Authentication
Open
Data Encryption
WEP
Note: An RC4 stream cipher is used to encrypt the
frame body and cyclic redundancy checking (CRC)
of each IEEE 802.11 frame. This is the same
encryption algorithm as is used for Static WEP;
therefore, the data encryption method configured on
the client for this mode is WEP.
frame body and cyclic redundancy checking (CRC)
of each IEEE 802.11 frame. This is the same
encryption algorithm as is used for Static WEP;
therefore, the data encryption method configured on
the client for this mode is WEP.
This key is provided for
me automatically
me automatically
Enable (click to select) this option
Authentication Tab
Enable IEEE 802.1x
authentication for this
network
authentication for this
network
Enable (click to select) this option
EAP Type
Choose Smart Card or other Certificate
Smart Card or other
Certificate Properties
dialog box
Certificate Properties
dialog box
Validate Server
Certificate
Certificate
Enable (click to select) this option.
Certificates
Select the certificate from the list.