Gateway 6000 6100 6500 6600 m360 mx6000 mx6100 mx6200 mx6400 mx6500 mx6600 mx6900 nx500 Servicehandbuch
www.gateway.com
5
Preventing static electricity discharge
The components inside the notebook are extremely sensitive to static electricity, also known as
electrostatic discharge (ESD).
Before performing maintenance on the notebook, follow these guidelines:
electrostatic discharge (ESD).
Before performing maintenance on the notebook, follow these guidelines:
•
Avoid static-causing surfaces such as carpeted floors, plastic, and packing foam.
•
Remove components from their antistatic bags only when you are ready to use them. Do
not lay components on the outside of antistatic bags because only the inside of the bags
provide electrostatic protection.
not lay components on the outside of antistatic bags because only the inside of the bags
provide electrostatic protection.
•
Always hold components by their edges. Avoid touching the edge connectors. Never slide
components over any surface.
components over any surface.
•
Wear a grounding wrist strap (available at most electronics stores) and attach it to a bare
metal part of your workbench or other grounded connection.
metal part of your workbench or other grounded connection.
•
Touch a bare metal surface on your workbench or other grounded object.
Tape
Some of the procedures in this guide involve removing tape that holds cables or components.
Two types of tape are used in this Gateway notebook:
Two types of tape are used in this Gateway notebook:
•
Mylar, non-conductive tape is typically transparent, with a red or brown tint.
•
Conductive tape is typically grey or silver.
If the existing tape cannot be reused, replace it with the same type (conductivity) of tape. Both
types of replacement tape should be non-ESD generating tape.
Do not use cellophane tape.
types of replacement tape should be non-ESD generating tape.
Do not use cellophane tape.
Warning
To avoid exposure to dangerous electrical voltages and moving parts, turn off the
notebook, remove the battery, and unplug the power cord, modem cable, and network
cable before opening the case.
cable before opening the case.
Warning
To prevent risk of electric shock, do not insert any object into the vent holes of the
notebook.
Important
Before performing maintenance on the notebook, you should read and understand
the information in this section.